500594
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
4. You could now repeat the step 1 to 3 to learn others thermostats. (don’t forgot to switch off the thermostat
when the learning is finished to avoid perturbation during the others learning)
5. When you have finished the installation of all thermostats with your Master-RF, press 5 seconds on the
(OK) key to exit the install menu.
6. On the main menu you can see the group zone (zones which been assigned with the same thermostat) by
pressing the (◄) or (►), the LED which blinks in the same time will works in the same way.
8. SPECIALES FUNCTIONS
Pump Delay
To avoid pump damage and noise in hydraulic circuit (Water flow in the pipe) the start-up of the pump will be
delayed for 1 minute after a heating demand from the zone thermostats. This time will permit to jump the opening
time of the thermal actuators.
Erase thermostat function:
With this function you could remove one or several thermostats of your installation.
Once on the “RF init” menu, choose the zone which must be removed with the blinking cursor and press 5 seconds
in the same time the (◄) or (►) keys. Then the LED(s) of the zone(s) which worked with the thermostat will be
removed.
Factory settings function:
Use this function to erase all configurations and download the factory settings.
Once on the RF init” menu, press in the same time during 5 seconds the tree keys (◄), (OK) and (►). Release
the keys only when all LED are blank, after few seconds all LED must be flash in green. Then the product has been
reset.
9. PERSONNAL NOTE
Zone number
Thermostat (type,
number…)
Room
Information
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8
Zone 9
Zone 10
Zone 11
Zone 12
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radson 52052 - UFH MASTER RF 6 Zones at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radson 52052 - UFH MASTER RF 6 Zones in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info