500597

Radson 51055 - SLAVE RF Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
6
6. INSTALLATION MENU
In order to enter in the installer menu, press the (OK) key during 10 seconds, then the following screen with the
software version must be appear:
How to change a parameter value?
Once the parameter is displayed, press the (OK) key to edit the value, then you can adjust it with (-) or (+) keys.
Press (OK) or wait few seconds to valid your adjustments.
How to exit the installer menu?
To exit the parameter menu, go to the parameter “End” and press (OK).
Names
Description
Default setting & Other possibility
Software version
Radio configuration mode (see the corresponding section)
Type of degrees displayed
°C: Celsius degrees.
°F: Fahrenheit degrees.
Actuator type
NC: Normally closed actuator.
NO: Normally open actuator.
Type of the Heating &
Cooling commutation
Winter / Summer
If 2 Masters are
installed in the house, only
one Master must be use this
function (CtaC or SenS).
The second Master will be
always adjusted on « rF ».
rF: The Heating & Cooling mode will be done by the RF
main zone programmer.
* Generally use when separate system is installed. (Boiler,
water chillers...)
CtAC: The Heating & Cooling mode will be done by the
Heat Pump connected on the special input of your RF
receiver (see the wiring for more explanation)
* Generally use when manual or automatic reversible
Heat pump
SEnS: The heating & Cooling mode will be done by the
sensor installed on the incoming pipe of the manifolds and
connected on the special input on RF receiver (see the
wiring for more explanation) * Generally use when
reversible heat pump without Heat & Cool information and
control is installed.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radson 51055 - SLAVE RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radson 51055 - SLAVE RF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info