569994
50
Zoom out
Zoom in
Previous page
1/72
Next page
50
Trunking Operation
SETTING SQUELCH FOR THE
TRUNKING MODE
Your scanner automatically mutes the audio during trunk
scanning when it decodes control channel data. Howev-
er, we recommend you turn
SQUELCH
clockwise and
leave it set to a point just after the hissing sound stops.
This lets the scanner quickly acquire the data channel.
PROGRAMMING TRUNKING
FREQUENCIES
You program trunking frequencies just like non-trunked
frequencies, except that you must store the appropriate
mode (MO, ED, or LT) with each frequency.
Notes:
You can store only one trunked EDACs and Motor-
ola channel in a bank. You can, however, mix LTR
and conventional channels in a bank.
If you are scanning UHF trunking frequencies under
the 512 MHz range using subaudible data and are
not using a base frequency and offset, lock out all
data channels. See “Programming Motorola Trunk-
ing Systems (UHF-Lo)” on Page 51 and “Locking
Out Channels or Frequencies” on Page 41. Turn off
the scanner to remove the lockouts.
• If you are programming trunked frequencies for
Motorola Type I and hybrid systems, you must first
program the fleet map (see “Programming Fleet
Maps” on Page 53).
You must store frequencies using the subaudible
trunking method in banks, mode by mode.
Follow these steps to program trunked frequencies.
1. Press
PGM
and select the bank, then press
TRUNK
to enter the ID program mode.
2. Repeatedly press
MODE
to select
LT
for EF
Johnson,
MO
for Motorola, or
ED
for the EDACS
(GE/Ericsson) system to scan. This sets the talk
group ID decoding method to be used for the bank.
20-522b.fm Page 50 Thursday, September 7, 2000 9:41 AM
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-92 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info