569994
48
Zoom out
Zoom in
Previous page
1/72
Next page
48
Trunking Operation
2. Press
FUNC
then
9
.
Use
Up/Down
keys to
set
contrast.
appears.
3. Press or to select the contrast.
4. Press
ENTER
to set the display contrast.
CLONING THE PROGRAMMED DATA
FROM SCANNER TO SCANNER
You can transfer the programmed data to and from an-
other RadioShack Cat. No. 20-522A or Cat. No. 20-196
scanner using the supplied clone cable. To clone the da-
ta, follow these steps.
1. Turn on both scanners.
2. Connect the supplied clone cable to each scanner’s
PC/IF
jack.
CLONE
MODE
UP
to
send,
remove
cable
to
exit
appears.
3. Press .
Confirm
send
data?
1=Yes
Press
other
key
for
No.
appears.
4. Press
1
to send the data to the other unit or press
any other key to cancel the operation.
The scanner sends the data. To exit the clone mode, re-
move the cable.
ˆ
Trunking Operation
The scanner tracks transmissions that use the Motorola
®
Type I and Type II (such as Smartnet and Privacy Plus)
and hybrid analog trunking systems, plus GE/Ericsson
(EDACS) and EF Johnson (LTR) type systems, which
are extensively used in many communication systems.
Trunking systems allocate a few frequencies to many dif-
ferent users. When the mobile unit transmits a signal,
one frequency is chosen from among the allocated fre-
quencies in that trunking system. The user’s
ID talk
group
is sent with the signal.
To receive trunking signals, you must store all the trunk-
ing group frequencies in one bank (see “Storing Known
Frequencies into Channels” on Page 30) and input ID
20-522b.fm Page 48 Thursday, September 7, 2000 9:41 AM
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-92 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info