569994
31
Zoom out
Zoom in
Previous page
1/72
Next page
31
Operation
Notes:
If you made a mistake in Step 3,
Invalid
Freq
briefly appears and the scanner beeps
when you press
ENTER
. Start again from Step 3.
Your scanner automatically rounds the entered
frequency to the nearest valid frequency. For
example, if you enter a frequency of 151.473,
your scanner accepts it as 151.470.
•Press
FUNC
then
DELAY/1
to turn the delay func-
tion on or off. To have the scanner pause for 2
seconds on this channel after a transmission
before proceeding to the next active transmis-
sion, see “Using the Delay Function” on Page 40.
The scanner stores this setting in the channel.
If you are storing frequencies for an EDACS sys-
tem, you must store them in logical channel num-
ber order, with the first frequency in channel 1 for
the current bank.
5. If necessary, press
MODE
to change the receiving
mode. If you select
P/L
or
DPL
, enter the PL or
DPL code by pressing
STEP
(to move up through
the codes) or
FUNC
then
STEP
(to move down
through the codes).
6. If desired, program a text tag for the channel (see
“Assigning a Text Tag to a Channel”).
7. The next channel in sequence is ready for program-
ming. Press
PGM
and then repeat Steps 3 through
5.
STORING TEXT TAGS
You can customize your scanner by storing text tags (up
to 12 characters) for easy identification of channel trans-
missions, trunk IDs, or banks.
Assigning a Text Tag to a Channel
1. Press
MANUAL
, enter the channel number where
you want to enter the text, then press
MANUAL
again.
M
and the channel number appear at the
upper left corner of the display (for example:
M100
).
20-522b.fm Page 31 Thursday, September 7, 2000 9:41 AM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-92 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info