569994
29
Zoom out
Zoom in
Previous page
1/72
Next page
29
Operation
greatly improve EDACS scanning in a fringe area. If you
are having trouble scanning an EDACS system, try man-
ually selecting the data channel. If you are getting good
reception, the scanner will indicate talk group
CTL-01
.
Try changing your location or using an outdoor antenna
to improve reception.
ˆ
Operation
TURNING ON THE SCANNER AND
SETTING SQUELCH
1. Turn
SQUELCH
fully counterclockwise until the indi-
cator points to
MIN
before you turn on the scanner.
2. To turn on the scanner, turn
VOLUME
clockwise.
Welcome
To
Multi-System
Trunking
ap-
pears. After about 3 seconds, you hear a hissing
sound.
3. Turn
SQUELCH
clockwise, just until the hissing
sound stops.
4. To turn off the scanner when you finish, turn
VOL-
UME
counterclockwise to
OFF
.
Notes:
The scanner does not scan if there are no fre-
quencies stored in channels. If the scanner does
not scan and you have already stored frequen-
cies in channels, turn
SQUELCH
further clock-
wise.
If the scanner picks up unwanted, partial, or very
weak transmissions, turn
SQUELCH
clockwise to
decrease the scanner’s sensitivity to these sig-
20-522b.fm Page 29 Thursday, September 7, 2000 9:41 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-92 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info