569996

RadioShack PRO-2067- 500 Channel Manual

10
Zoom out
Zoom in
Previous page
1/56
Next page
10
• Always connect the adapter or DC
power cord to the scanner before
you connect it to the power
source. When you finish, discon-
nect the adapter or DC power
cord from the power source before
you disconnect it from the scan-
ner.
• For added safety and to protect
your scanner, disconnect the
cable from your vehicle battery’s
negative (
–
) terminal before you
begin.
Follow these steps to connect the sup-
plied DC power cord.
1. Connect the power cord’s black
wire to a chassis ground, such as
a metal screw attached to a metal
part of the vehicle’s frame. Be
sure that the screw is not insu-
lated from the frame by a plastic
part.
2. Connect the power cord’s red wire
(with in-line fuse) to a source of
voltage that turns on and off with
the ignition switch, such as a
spare accessory terminal in your
vehicle’s fuse box.
3. Insert the power cord’s barrel plug
into the
DC 13.8V
jack on the back
of the scanner.
4. Reconnect the cable to the vehi-
cle battery’s negative (
–
) terminal.
To power the scanner from a vehicle’s
12V power source (such as a ciga-
rette-lighter socket), you need a 12V,
500-mA DC cigarette-lighter adapter
(not supplied), available at your local
RadioShack store.
To connect an optional DC cigarette-
lighter power cable, insert its barrel
plug into the
DC 13.8V
jack on the back
of the scanner, then plug the power
cable into your vehicle’s cigarette
lighter socket.
Note:
If you use a cigarette-lighter
power cable and your vehicle’s engine
is running, you might hear electrical
noise from the engine while scanning.
This is normal.
USING THE SCANNER
AS A BASE STATION
You can place this scanner on a desk,
shelf, or table to use it as a base sta-
tion.
20-196a.fm Page 10 Friday, June 2, 2000 3:48 PM
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2067- 500 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2067- 500 Channel in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info