569996
9
Zoom out
Zoom in
Previous page
1/56
Next page
9
Caution:
Be sure to avoid obstruc-
tions behind the mounting surface.
Follow these steps to mount the scan-
ner in your vehicle.
1. Choose a mounting location, then
use the supplied mounting bracket
as a template to mark the posi-
tions for the mounting screw
holes.
2. In the marked positions, drill holes
slightly smaller than the supplied
screws.
3. Attach the mounting bracket to the
mounting location using the sup-
plied screws and lock washers.
4. Attach a rubber washer to both of
the mounting bracket’s holes.
5. Attach the scanner to the mount-
ing bracket using the supplied
mounting knobs.
6. Connect the antenna’s cable to
the
ANT
jack on the back of the
scanner.
Note:
If the antenna cable’s connector
does not fit in the
ANT
jack, you might
also need a Motorola-to-BNC antenna
plug adapter (available at your local
RadioShack store).
POWERING THE
SCANNER
You can power your scanner using ei-
ther the supplied DC power cord or
from your vehicle’s cigarette lighter
socket using an optional DC cigarette
lighter power cable.
Cautions:
You must use a power
source that supplies 12V
DC and delivers at least
500 mA. Its center tip must be set
to positive and its plug must fit the
scanner's
DC 13.8V
jack. The sup-
plied DC power cord meets these
specifications. Using a power cord
that does not meet these specifi-
cations could damage the scanner
or the adapter.
!
20-196a.fm Page 9 Friday, June 2, 2000 3:48 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2067- 500 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2067- 500 Channel in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info