570004

RadioShack PRO-2053 - 300 Channel Manual

37
Zoom out
Zoom in
Previous page
1/56
Next page
37
Trunking Operation
Locking Out Talk Group IDs
Note:
You can only lock out talk group IDs
when the scanner is in the closed mode (see
“Open and Closed Modes” on Page 38).
1. Press
PROG
.
2. Press
TRUNK
.
3. Press
FUNC
,
8
88
8
or
9
99
9
to move to the
desired bank.
4. Press
8
88
8
or
9
99
9
to select the ID memory.
5. Press
L/OUT
to lock out the ID.
B
BB
B
appears.
6. To remove the lockout from a trunking
ID, manually select the ID memory, and
press
L/OUT
until
(
((
(ý
ýý
ý
disappears.
While the scanner shows a text tag you can
confirm the ID code when the received signal
is the voice channel.
1. Press
TEXT
while the scanner is receiv-
ing the voice channel and displaying the
text tag. The ID code appears as
)+0è444444
)+0è444444)+0è444444
)+0è444444
or
! è4444
! è4444! è4444
! è4444
.
2. Press
TEXT
again to cancel.
Delay Function in ID Indication
Mode
You can set the ID delay function separately
from channel delay.
1. Press
FUNC
then
./DELAY
while you are
programming the trunked ID.
1J<ý 1Gó
1J<ý 1Gó1J<ý 1Gó
1J<ý 1Gó
FNEýB<PJýKFýJ<Ký% ý;<C8P
FNEýB<PJýKFýJ<Ký% ý;<C8P FNEýB<PJýKFýJ<Ký% ý;<C8P
FNEýB<PJýKFýJ<Ký% ý;<C8P
.
ý
ýý
ý
ðôòýJ<:FE;J
ðôòýJ<:FE;JðôòýJ<:FE;J
ðôòýJ<:FE;J
appears.
2. Press
8
88
8
or
9
99
9
to select
*FE<
*FE<*FE<
*FE<
,
òôí
òôíòôí
òôí
,
ñôò
ñôòñôò
ñôò
,
ñôí
ñôíñôí
ñôí
,
ðôò
ðôòðôò
ðôò
,
ðôí
ðôíðôí
ðôí
,
ïôò
ïôòïôò
ïôò
,
ïôí
ïôíïôí
ïôí
or
îôò
îôòîôò
îôò
J<:FE;J
J<:FE;JJ<:FE;J
J<:FE;J
.
3. Press
ENTER
.
If the ID delay is active, it watches the control
channel command for the delay time when-
ever the signal disappears from the voice
channel.
Reviewing Locked-Out Talk Group
IDs
Note:
You cannot clear all lockouts from a
talk group at the same time.
1. Press
PROG
then
TRUNK
.
2. Press
FUNC
then
L/OUT
. The locked out
ID appears. If the ID memory bank has
no locked out ID, you hear the low beep
tone.
3. Press
FUNC
then
8
88
8
or
9
99
9
to select a
search bank. Or, just press
8
88
8
or
9
99
9
to
search for any locked out IDs in a bank.
Clearing Talk Group IDs
1. Press
PROG
then
TRUNK
.
2. Press
FUNC
,
8
88
8
or
9
99
9
to select ID
memory.
3. Press
FUNC
then
CLEAR
.
Clearing All Talk Group IDs in One
Bank
You can clear all talk group IDs within a
bank. This lets you quickly delete all talk
group IDs from a bank if you want to use the
bank to store different data (such as a new
set of talk group IDs).
1. Press
PROG
.
2. Press
TRUNK
to enter a talk group ID
memory mode.
3. Select a talk group ID bank using
FUNC
,
8
88
8
or
9
99
9
.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2053 - 300 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info