Manual RadioShack PRO-2053 - 300 Channel (page 35 of 56) (English)

570004

Zoom out

Zoom in

1/56

Trunking Operation

6. Press

ENTER

for each entry. If you make

a mistake, press

CLEAR

and enter the

correct size code.

Notes:

• The default setting of the bank is for

Motorola Type II. However, if you set

Type I and you want to return to Type

II, enter 15 at Step 5.

• To confirm the input, repeat Steps 1–

5 and press

ENTER

. Each time you

press

ENTER

, you confirm the size

code. If you find an error, press

CLEAR

and begin again at Step 1.

7. Press

SCAN

to start scanning.

Talk Group IDs

There are 10 talk group ID banks and each

ID bank has 5 sub-banks. Each sub-bank

has 20 ID locations. You can program up to

100 talk group IDs in each bank, so you can

program up to 1,000 talk group IDs in 10

banks. When the scanner stops on a trans-

mission in the Motorola, or EDACS mode, it

checks to see if the ID has been stored. In

the closed mode, the scanner only stops on

the transmission and displays its text tag if

you have stored and not locked out the ID. In

the open mode, the scanner always stops on

a transmission, but it displays the ID's text

tag if you have stored the ID.

Storing Talk Group IDs

To store a talk group ID, press

TRUNK

when

the scanner stops on a voice channel trans-

mission or when a talk group ID is indicated

in the manual mode.

The bottom line indicates where the ID was

entered as

% ý J8M<ý 4

% ý J8M<ý 4% ýJ8M<ý 4

% ý J8M<ý 4V4

V4V4

V44

and then changes

ýý

ý% û4444

% û4444% û4444

% û4444

. The first X in

% ýJ8M<ý4V44

% ýJ8M<ý4V44% ýJ8M<ý4V44

% ýJ8M<ý4V44

is the

sub-bank number (0–4) in the bank. XX is

the position number of the ID (00–19) in each

sub-bank.

If you press

TRUNK

and the ID is already

stored,

% ýN8JýJ8M<;

% ýN8JýJ8M<;% ýN8JýJ8M<;

% ýN8JýJ8M<;

appears.

Note:

When you try to store more than 100

talk group IDs in a bank,

)<DFIPý =LCCü

)<DFIPý =LCCü)<DFIPý =LCCü

)<DFIPý =LCCü

ap-

pears. Clear some talk group IDs in order to

store new ones (see “Clearing Talk Group

IDs” on Page 37).

Follow these steps to manually store talk

group IDs or to edit a stored ID.

1. Press

PROG

2. Press

TRUNK

3. To select the bank where you want to

store the ID, repeatedly press

FUNC

then

until you reach the

desired bank.

4. Press

TRUNK

repeatedly to select the

sub-bank.

5. Press

to select the location

where you desire to store the ID num-

ber.

7 S0S4S0S4S0———

Block

Size Code

910111213141516

8Wdaý&#&

8Wdaý&#&8Wdaý&#&

8Wdaý&#& ED

EDED

?:ýD

?:ýD?:ýD

?:ýD e$

e$e$

e$ ý&&

ý&&ý&&

ý&&

CEJ0ýded[

CEJ0ýded[CEJ0ýded[

CEJ0ýded[

First ID location

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-2053 - 300 Channel Manual

Product: