570004

RadioShack PRO-2053 - 300 Channel Manual

16
Zoom out
Zoom in
Previous page
1/56
Next page
16
Operation
Function” on Page 26. The scanner
stores this setting in the channel.
5. If necessary, press
MODE
to change the
receiving mode.
6. If desired, program a text tag for the
channel (see “Assigning a Text Tag to a
Channel”").
7. The next channel in sequence is ready
for programming. Press
PROG
and then
repeat steps 3 through 6.
STORING TRUNKING
FREQUENCIES INTO
CHANNELS
1. Press
PROG
and
FUNC
then
8
88
8
or
9
99
9
to
select the desired bank to program.
2. Press
TRUNK
to enter into trunking
mode.
3. Repeatedly press
MODE
to select
)+0
)+0)+0
)+0
(Motorola) or
!
! !
!
(EDACS).
4. Press
PROG
and select the channel
number using
8
88
8
or
9
99
9
.
5. Enter the UHF trunking frequency and
press
ENTER
.
6. Repeat Steps 4 and 5 to enter the other
trunking group frequencies for EDACS
or control channel frequencies for
Motorola trunking.
7. If necessary, press
MODE
to change the
receiving mode.
STORING TEXT TAGS
You can customize your scanner by storing
text tags (up to 12 characters) for easy iden-
tification of channel transmissions, trunk IDs,
or banks.
Assigning a Text Tag to a Channel
1. Press
MAN
, enter the channel number
where you want to enter the text, then
press
MAN
again.
)
))
)
and the bank and
channel number appear at the upper left
corner of the display (for example:
)ñòò
)ñòò)ñòò
)ñòò
).
2. Press
PROG
.
)
))
)
changes to
,
,,
,
.
3. Press
TEXT
. The cursor appears at the
third line.
4. Enter the text using the numeral keys
(see “Text Input Chart” on Page 17).
Note:
If you make a mistake, press
8
88
8
or
9
99
9
to move to the character you want
to change.
For example, to identify amateur (Ham)
radio transmissions in the 6 meter
range, input "HAM 6m" as follows:
• "H" is the second letter associated
with 4 on the keypad. Press
4
then
2
.
• "A" is the first letter associated with 2
on the keypad. Press
2
then
1
.
• "M" is the first letter associated with 6
on the keypad. Press
6
then
1
.
• "Space." Press
./DELAY
.
• "6" is the sixth number associated
with 1 on the keypad. Press
1
then
6
.
• "m" is the first letter associated with 6
on the keypad. Press
6
and
FUNC
(for
the lower case set), then press
1
.
5. Press
ENTER
to input the text.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2053 - 300 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info