570004

RadioShack PRO-2053 - 300 Channel Manual

15
Zoom out
Zoom in
Previous page
1/56
Next page
15
Operation
scanner's sensitivity to these signals. If
you want to listen to a weak or distant
station, turn
SQUELCH
counterclock-
wise.
•If
SQUELCH
is adjusted so you always
hear a hissing sound, the scanner will
not scan properly.
• To ensure the scanner operates properly
while in the trunking mode, we suggest
you set
SQUELCH
using the steps listed
above.
STORING KNOWN
FREQUENCIES INTO
CHANNELS
Good references for active frequencies are
RadioShack's Police Call, Aeronautical Fre-
quency Directory
, and
Maritime Frequency
Directory
. We update these directories every
year, so be sure to get a current copy. Also
see the supplied
Trunking Guide
.
Note:
If you are storing frequencies for an
EDACS system, you must store them in logi-
cal channel number order, with the first fre-
quency in channel 1 for the current bank.
Follow these steps to store frequencies into
channels.
1. Press
MAN
, enter the bank (0–9) and
channel number (00–29) where you
want to store a frequency, then press
MAN
again.
)
))
)
and the bank and channel
number appear at the upper left corner
of the display (for example:
)
))
)òò
òòòò
òòò
òò
ò
).
Note:
When
)
))
)
is on the display, you can
also select your desired bank and chan-
nel number with the
FUNC
and arrow
keys.
• Press
FUNC
then press
8
88
8
or
9
99
9
.
The bank number moves in the direc-
tion of the arrow pressed.
• Press
FUNC
then press and hold
8
88
8
or
9
99
9
. The bank number moves con-
tinuously in the assigned direction.
• Press
8
88
8
. The channel number
moves upward one by one. Or, press
9
99
9
. The channel number moves
downward one by one.
2. Press
PROG
.
)
))
)
changes to
,
,,
,
.
3. Use the number keys and
.
/
DELAY
to
enter the frequency (including the deci-
mal point) you want to store.
If you make a mistake, press
CLEAR
to
delete a single digit or press and hold
CLEAR
about 2 seconds to delete all dig-
its.
4. Press
ENTER
to store the frequency into
the channel.
Notes:
• If you made a mistake in Step 3,
%EM8C@;
%EM8C@;%EM8C@;
%EM8C@;
"I<H
"I<H"I<H
"I<H
briefly appears and the scanner
beeps when you press
ENTER
. Start
again from Step 3.
• Your scanner automatically rounds the
entered frequency to the nearest valid
frequency. For example, if you enter a
frequency of 151.553, your scanner
accepts it as
ñíñôííò
ñíñôííòñíñôííò
ñíñôííò
.
• To have the scanner pause for 2 sec-
onds on a channel after a transmission
before proceeding to the next active
transmission, press
.
/
DELAY
to turn the
delay function on. See “Using the Delay
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2053 - 300 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info