570007

RadioShack PRO-2018 - 200 Channel Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
Preparation
5
75+0)"8'*+%.'"$#66'4;"219'4
You can power the scanner from a vehicle’s 12V power source
(such as a cigarette-lighter socket) using a 12V, 300 mA DC
adapter and a size D Adaptaplug™ adapter (neither supplied).
Both are available at your local RadioShack store.
.
To power the scanner using a DC adapter, attach the
Adaptaplug to the DC adapter so the tip reads positive (+)
and set the adapter's voltage switch to 12V. Next, insert the
Adaptaplug into the scanner's
DC 12V
jack. Plug the other
end of the DC adapter into your vehicle's cigarette-lighter
socket.
±
%100'%6+0) "#0"#06'00#
%QPPGEVKPI"VJG"5WRRNKGF"#PVGPPC
You must install an antenna before you can operate the
scanner.
The supplied telescoping antenna helps your scanner
receive strong local signals. To install the antenna, thread it
clockwise into the hole on top of the scanner.
The scanner's sensitivity depends on its location and the
antenna's length. For the best reception of the
transmissions you want to hear, adjust the antenna's length
according to the chart below.
%QPPGEVKPI"CP"1WVFQQT"#PVGPPC
Instead of the supplied antenna, you can connect an
outdoor base station or mobile antenna (neither supplied) to
your scanner. Your local RadioShack store sells a variety of
antennas. Choose the one that best meets your needs.
(TGSWGPE["
4CPIG"*/*\+
#PVGPPC".GPIVJ
29
–
174 Extend fully
380
–
512 Extend 2 segments
.
"%#76+10"
.
Always connect the DC adapter to
the scanner before you connect it
to a power source. When you
finish, disconnect the adapter from
the power source before you
disconnect it from the scanner.
±
"016'"
±
"
• If you use a cigarette-lighter
power cable and your vehicle's
engine is running, you might
hear electrical noise from the
engine while scanning. This is
normal.
• Mobile use of this scanner is
unlawful or requires a permit in
some areas. Check the laws in
your area.
20-424.fm Page 5 Monday, September 9, 2002 9:44 AM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2018 - 200 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2018 - 200 Channel in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info