713892

Quickie RubiX 2 Plus Manual

19
Zoom out
Zoom in
Previous page
1/188
Next page
19HeliX
2
ENGLISH
ADVICE TO CLIENT
DANGER!
• Do not rely on the lap belt only when the wheelchair and
occupant are transported in a vehicle, use the separate
occupant lap and diagonal restraints provided in the vehicle.
• Before use we recommend that the lap belt be checked to
ensure that it is adjusted correctly, free from any obstruction or
adverse wear and that the buckle engages securely.
• Failure to make sure that the lap belt is secure and adjusted
prior to use could cause serious injury to the user. e.g. too
loose a strap may allow the user to slip down in the chair and
risk suffocation.
MAINTENANCE:
Check lap belt and securing components at regular intervals for any
sign of fraying or damage. Replace if necessary. Clean the lap belt
with warm soapy water and allow it to dry.
DANGER!
The lap belt should be adjusted to suit the end user as detailed
above Sunrise Medical also recommend that the length and fit of
the belt is checked on a regular basis to reduce the risk of the end
user inadvertently re-adjusting the belt to an excessive length.
If in doubt about the use and operation of the seat belt then ask
your healthcare professional, wheelchair dealer, carer or attendant
for assistance.
Options - Seat
COMFORT SEAT
The Comfort seat allows you to be seated for a long period of time,
because of the layer of wood and anatomically shaped cushions,
(Fig.49).
WARNING!
Brackets must lock in the cross brace tubes when fitting the seat.
Options – Seat depth growth
SEAT DEPTH
By removing the clips (1), the cross-brace unit (2) can be pushed
along the frame, which then alters the seat depth (depending on the
position of the back tubes).
Make sure that the clips (1) snap into the frame holes provided.
To keep the frame as compact as possible, the seat depth can also
be adjusted by using the back tubes (41 – 46 cm in steps of 2.5
cm). To do this remove the screws (1 and 2) on the back tube
bracket. Remove the wheels and the armrests and check that the
cross-brace is in the desired position (push the cross-brace as
described above). Move the back tubes to the desired position and
re-tighten all screws. Move the receiver tube for the armrests to the
desired position, (Fig. 50).
Fig. 50
1
2
Options – Push Handles
HEIGHT-ADJUSTABLE
PUSH HANDLES
These handles are secured
with pins to prevent them from
sliding out unintentionally. By
releasing the release lever you
can adjust the push handles to
a height which suits you. After
any adjustment to the height of
the push handles, pull the
release lever until it is tight,
(Fig.51).
WARNING!
If the lever is not secure, injuries could result when lifting over
obstacles.
Fig. 51
Fig. 49
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie RubiX 2 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie RubiX 2 Plus in the language / languages: English, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info