713891

Quickie HeliX 2 Comfort Manual

20
Zoom out
Zoom in
Previous page
1/188
Next page
ENGLISH
20 HeliX
2
Options – Crutch holder
CRUTCH HOLDER
This device permits crutches to
be transported directly on a
wheelchair. It has a Velcro
loop to fasten crutches or other
aids, (Fig.52).
WARNING!
Never try to use or remove the
crutches or other aids while
moving.
Options - Therapy table
THERAPY TABLE
The tray provides a flat surface
for most activities. Before
using a tray, it first has to be
adjusted to the width of the
seat by an authorised dealer.
The user must be sitting in the
wheelchair during this
adjustment, (Fig.53).
Fig. 52
Fig. 53
Options – Stabilising bar
SWING AWAY STABILISING BAR
This bar is used to stabilise the backrest. To be able to fold the
wheelchair, the release lever (1) must be pushed inwards and the
stabilising bar must be flipped downwards.
When unfolding the wheelchair, please make sure that the
stabilising bar is locked into position, (Fig.54).
FOLDING STABILISING
BAR
This bar is used to stabilise the
backrest. To be able to fold the
wheelchair, the stabilising bar
must be pushed downwards in
the middle (1). To completely
unfold the wheelchair, the
carrying handle (2) must be
pulled upwards, (Fig.55)
Fig. 54
1
Fig. 55
1
2
Options – Headrests
HEADRESTS
The headrest can be raised and
moved both forwards and
backwards. To do this, simply
loosen the screw (1 or 2), adjust
the headrest to the desired
position and tighten the screw
(see the section on torque),
(Fig.56).
COMFORT HEADREST
To adjust the height open the
star knob (3) and move the
headrest into the right position.
Please re-tighten the star knob,
(Fig.57).
Fig.56
1
2
Fig. 57
3
TRANSIT WHEELS
Transit wheels should be
used wherever your
wheelchair would be too wide
if the rear wheels were used
(e.g., in airplanes, buses,
etc.). After the rear wheels
have been removed with the
aid of the quick-release axles,
the transit wheels can
immediately be used to
continue riding. The transit
wheels are mounted so that
they are approx. 3 centimeters above the ground when not in use.
They are thus out of the way when riding, transporting or when
tipping to pass over obstacles (e.g., kerbs, steps, etc.) (Fig. 58).
DANGER!
Your wheelchair does not have any wheel locks when the transit
wheels are being used.
Options – Transit wheels
Fig. 58
Options – One-hand operation
ONE-HAND OPERATION
To move the wheelchair in a
straight line, both hand wheels
must be operated. If the
wheelchair is to be folded up,
remove the pull-off bar by
pushing it inwards, (Fig.59).
WARNING!
To avoid injury, always make
sure that all connections are
firmly in place.
Fig. 59
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie HeliX 2 Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie HeliX 2 Comfort in the language / languages: English, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info