Manual Quickie Argon 2 (page 21 of 72) (English, Dutch, French)

713882

Zoom out

Zoom in

1/72

ENGLISH

Argon

Rev.1.0

DANGER !

• Before using your wheelchair ensure the lap belt is

worn.

• The lap belt must be checked on a daily

• basis to ensure it is free from any obstruction or

adverse wear.

• Always make sure that the lap belt is correctly

secured and adjusted prior to use. If the strap is too

loose it could cause the user to slip down and risk

suffocation or cause serious injury.

The lap belt is fitted to the wheelchair as shown in the

illustrations. The seat belt comprises 2 halves. They are

fitted using the existing seat stay retaining bolt fitted

through the eyelet on the belt. The belt is routed under

the rear of the side panel. (Fig. 4.41)

Adjust the belt position so buckles are in the centre of the

seat. (Fig. 4.42)

Anteria Lateral Support (Lap belt)

Fig. 4.41

Fig. 4.42

Crutch holder

Crutch Holder (Fig.4.39)

This device permits crutches to be transported directly on

the wheelchair. It has a Velcro loop to fasten crutches or

other aids.

CAUTION!

Never try to use or even remove the crutches or other

aids while moving.

Adjust Lap Belt To Suit The User’s Needs As Follows:

To reduce the belt

length

To increase the belt length

Feed free belt

back through male

buckle and slide

adjusters.

Ensure belt is not

looped at male

buckle.

Feed free belt through slide adjusters

and male buckle to provide more belt

length.

When fastened check space between the lap belt and

user. When correctly adjusted it should not be possible to

insert more than the flat of the hand between the lap belt

and the user. (Fig. 4.43 overleaf).

Travel Wheels (Fig.4.40)

Travel wheels should be used

wherever your wheelchair

would be too wide if the rear

wheels were used (e.g., in

airplanes, buses, etc.). After

the rear wheels have been

removed with the aid of the

quick-release axles, the transit

wheels can immediately be

used to continue riding. The

transit wheels are mounted so

that they are approx. 3 centi-

meters above the ground when not in use. They are thus

out of the way when riding, transporting, or when tipping

to pass over obstacles (e.g., kerbs, steps, etc.).

CAUTION:

Your wheelchair does not have any wheel locks when the

transit wheels are being used.

NOTE: When the chair is to be set up with the transit

wheels and the anti-tip tubes, the transit mounting must

be installed between the camber tube clamp and the anti-

tip tube clamp mounting (not shown).

Travel Wheels

Fig.4.40

Fig.4.39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Argon 2 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Argon 2 Manual

Product: