713882

Quickie Argon 2 Manual

18
Zoom out
Zoom in
Previous page
1/72
Next page
18
ENGLISH
Argon
2
Rev.1.0
Adjustable Back Sling
The adjustable back sling can be adjusted for tension by
using several straps.
The back sling upholstery can be accessed from the
inside via an opening and can be padded to suit individual
tastes (Fig. 4.27).
Height-Adjustable Backrest
The backrest may be set to various back heights, in 2.5
cm steps. The adjustment ranges are 25- 30 cm, 30- 35
cm, 35- 40 cm and 40- 45 cm. Release the screws (1+2)
and set the backrest to the desired height. Tighten up the
screws again (see the page on torque). (Fig. 4.28).
Sideguard
Fig.4.29 - 4.30 Parts key
1. Outer armpost
2. Height Release Lever
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Receiver
8. Clamp
9. Receiver adjustment bolts
10. Clamp bolts
Fig. 4.27
Single Post Height-Adjustable Armrests
(Fig.4.29-4.32).
1. Installation
a. Slide the outer armpost into the receiver mounted to
the wheelchair frame.
b. The armrest will automatically lock into place.
2. Height Adjustment
a. Rotate height release lever (2) to second stop.
b. Slide armrest pad up or down to desired height.
c. Return lever to locked position against arm post.
d. Push arm pad (4) until upper arm post locks firmly into
place.
3. Removing Armrest
a. Pull lever 3 and lift entire arm.
4. Replacing Armrest
a. Slide armrest back into receiver until arm latches in
place.
Armrest Receiver Attachment
(Fig.4.29-4.32).
Adjusting Armrest Receiver Fit
To tighten or loosen the fit of the outer armpost in the
receiver:
1. Loosen the four receiver adjustment bolts (9) on the
sides of the receiver.
2. With the armrest in the receiver (7), squeeze the
receiver to achieve the desired fit.
3. Tighten the four bolts (9). (144 in-lbs, 16.3 Nm)
Position Adjustment
1. Loosen the two clamp bolts (10) until clamp is loose.
2. Slide armrest receiver to desired position.
3. Tighten
1
3
6
2
5
9
7
4
Fig. 4.29
10
7
8
9
Fig. 4.30
9
10
9
Fig. 4.31
Fig.4.32
7
Fig. 4.28
1
2
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Argon 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Argon 2 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info