692700
41
Zoom out
Zoom in
Previous page
1/100
Next page
41
must be larger than 100 m³.
Do not obstruct the inlet or outlet sections of the heater.
If the heater has to work for a long period at its maximum capacity, it’s possi-
ble that ice will form on the cylinder. This is due to excessive vapour withdra-
wal. Not for this reason, or for any other, should the cylinder be heated. To
avoid this effect, or at least to reduce it, use a large cylinder or two cylinders
linked together (Fig 1).
Do not use the heater in cellars, basements or in any room below the ground
level.
After use, turn the gas cylinder tap off.
The gas bottle must always be replaced following safety rules away from any
possible source of ignition.
The heater must be placed where there is no risk of fire, the hot air outlet
must be at least 3m from any flammable wall or ceiling and must never be
directed towards the gas bottle.
If in any doubt contact your supplier.
INSTALLATION
1. Connect the heater to a suitable electric socket /230V~50Hz
2. Make sure that the machine is properly earthed.
3. Connect the gas supply hose to the pressure regulator and connect the regu-
lator to a suitable LPG cylinder.
4. Open the tap of the cylinder and check the supply hose and fittings for gas
leak. For this operation it is recommended to use an approved leak detector.
INSTRUCTION FOR USE
PREPARING FOR OPERATION
1. Check the heater for possible shipping damage.
2. Connect the hose and regulator assembly to the LPG cylinder.
3. Open the cylinder’s gas valve and check all gas connections with a soap and
water solution.
4. Connect power cord to well-grounded 220V~, 50Hz source of power.
IGNITION / Manual ignition
1. Turn the power switch to position I and check that the fan starts running cor-
rectly.
2. Push the gas valve button and push repeatedly (!!) the ignitor (piezoelectric
lighter) until the flame lights up.
4
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima GFA 1030E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima GFA 1030E in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info