Manual Qlima GFA 1030E (page 40 of 100) (English, German, Dutch, French, Italian, Swedish)

692700

Zoom out

Zoom in

1/100

OPERATION

Safe operation

This appliance is designed for gas cylinders up to 15 kg

Avoid torsional stress to the flexible tubing between gas regulator and appliance.

Torsional stress might lead to gas leakage over time!

Note:

If a new tank has just been connected, please allow at least one minute or more

for the air in the gas pipeline to purge out through the pilot hole.

If the burner flame goes out accidentally or it is blown out by wind, turn off the

heater and wait at Ieast 5 minutes or more to let the gas dissipate before re-ligh-

ting to avoid possible gas explosion.

Warnings:

• The whole gas system. hose, regulator, pilot and burner should be inspected

for Ieak before use. But at least once a month and each time the gas cylinder

is changed. Check the hose assembly for sign of extreme abrasion, cuts or

wears. Suspected areas should be Ieak tested. If the hose Ieaks, it must be

replaced with a new one that conforms to IocaI standard codes. ). If it shows

signs of cracking, splitting or other deterioration it shall be exchanged for

new hose of the same length and of the equivalent quality.

• Always keep a dry chemical fire extinguisher readily available.

• For safety, always allow a 5-minute complete shut off period before re-ligh-

ting a hot heater.

• Replace the gas tube/hose within the interval described with the hose.

REPLACING THE GAS CYLINDER

• Shut off heater.

• Close the valve of the gas cylinder.

• Disconnect the regulator from the cylinder following the instructions that

came with your regulator.

• Replace the cylinder.

• Make sure there is no flame. Only when no flame: remove the plug or seal

cap from the cylinder valve.

• Check for the presence and good state of the gasket before connecting the

regulator to the new cylinder

• Check that the regulator seal is correctly fitted and able to fulfil its function.

• Perform leak test using soapy water solution.

WARNING: only change the gas cylinder in a amply ventilated area, away

from any ignition source (candle, cigarettes, other flame producing applian-

ces, ...).

SAFETY CLEARANCE

• For every kW it is necessary to have permanent ventilation of 25 cm², equally

distributed between the floor and high level, with a minimum outlet of 250

cm².

• Never direct the hot air flow towards the cylinder.

• Never use the heater without its cover.

• Do not exceed 100 W/m³ of free room. The minimum volume of the room

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qlima GFA 1030E in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 5,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qlima GFA 1030E Manual

Product: