633111

Qlima - Zibro S3364 Manual

52
Zoom out
Zoom in
Previous page
1/176
Next page
52
h Air direction Button: Press this button to change the swing angle of the louver. The swing angle of the
louver is 6
o
for each press. When the louver swings at a certain angle which would affect the cooling and
heating effect of the air conditioner, it would automatically change the swing direction. No symbol will
appear in the display area when press this button.
i Timer on Button: Press this button to initiate the auto-on time sequence. Each press will increase the
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
j Timer off Button: Press this button to initiate the auto-off time sequence. Each press will increase the
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
k RESET Button: When you press the recessed RESET button, all current settings are cancelled and the con-
trol will return to the initial settings.
l Indoor Freezing prevention / Turbo Button: Push this button on COOL mode, the air conditioner goes into
powerful cooling operation. Push again to cancel the TURBO function. Upon pressing this button (> 2 sec-
onds) the unit will go into the freezing prevention mode. The unit will overrule the indoor temperature
setting and will set it to approx 8 °C. In this way preventing your home from freezing during cold periods
at the lowest possible energy consumption. When this mode is selected the indoor unit display will show
“FP”. This button can only be operated in heating mode. To leave the Home Freezing Prevention Mode:
simply press the button once again.
m LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the remote
controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode.
n LED DISPLAY Button: Press this button to clear the digit display in the air conditioner. The digit display in
the air conditioner will reactivate itself automatically after 3 seconds, when no buttons are being pressed
in this period. Press it again to activate it (Not applicable to units without this function).
o Memory Button: Used to restore the manufacturing default setting or to resume a memorised setting.
- when the remote control is not yet programmed by the user the manufacturer default memory is “auto”
mode at 24°C with “auto” fan speed. Upon pressing the memory button the unit will change its setting
to “auto” mode at 24°C with “auto” fan speed
- after the user has changed the setting to his choice (for example heating, low fan and 25°C) this user
setting can be placed in the memory of the Remote control by pressing the memory button by more than
2 seconds.
- when the indoor unit is in any random setting, pressing the memory button for less than 2 seconds will
have the result that the indoor unit will move to the setting as programmed in the remote control mem-
ory
Names and Functions of indicators on Remote Controller
auto cool dryheatfan
sleep lock run
SET TEMP.TIMER ONOFF
4
52
fig. 2
2
1
3
4
5
6
7
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima - Zibro S3364 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima - Zibro S3364 in the language / languages: English, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info