610912

Qibbel Front bike seat Manual

9
Zoom out
Zoom in
Previous page
1/30
Next page
© 2014 Widek BV Krimpen aan den IJssel, The Netherlands
ENGLISH
Get on the bike and check whether the handlebars rotate and the brakes
operate freely and are not obstructed by the foot supports or the seat.
Ensure there is sufficient distance between the armrests of the seat and
the handlebars to prevent your child getting caught. If necessary, adjust
the handlebars.
AHEAD ATTACHMENT
Figure 6M | Ahead attachment
To fasten the ahead clamp, you will need a steering column height of at
least 20 mm. Mount the ahead attachment on top of the spacers of the
steering tube. Tighten the bolts (moment 8.0 Nm) using a socket head
wrench 6. Suitable for ahead steering tube Ø 22-36 mm. If necessary, use
the supplied spacer rings to prevent damage to the handlebars and the
the ball head cap.
The ahead clamp is also suitable for standard steering columns but does
not have a movable internal ring that allows you to change the angle of
inclination. The bottom of the bracket should rest on the steering head.
Tighten the nuts tightly (moment 8.0 Nm) using a socket head wrench 6.
Suitable for steering columns of 22-28 mm.
Figure 7M | Installing the seat on the ahead attachment
Remove the retaining ring from the pin and slide the two pins of the seat
into the round holes in the attachment. Slip the retaining ring through the
attachment pin to secure the seat in place. (If required, use the (optional)
lock instead of the retaining ring, to protect from theft).
Check whether the seat is correctly mounted.
Turn the handlebars of your bike into the straight-ahead position and
check whether the seat is mounted facing straight ahead.
Get on the bike and check whether the handlebars rotate and the brakes
operate freely and are not obstructed by the foot supports or the seat.
Ensure there is sufficient distance between the armrests of the seat and
the handlebars to prevent your child getting caught. If necessary, adjust
the handlebars.
If you want to use the seat on more than one bike, purchase an
additional steering tube attachment.
INSTALLING THE STYLING SET
Figure 8M | Attaching the foot straps
(Styling set Basic or De-luxe front)
Push the foot straps with the Qibbel logo on the inside through the
opening. Pull them through from the bottom to the top until they click into
place.
Figure 9M | Attaching armrests
(Styling set Basic or De-luxe front)
Click the armrest into the opening. Attach the armrest using the supplied
screws, tighten them gently (torque 1.0 Nm) using Allen key 2.5. Do this on
both sides of the seat.
Figure 10M | Attaching the seat upholstery
(Styling set De-luxe front)
Undo the safety belt (three-point – light grey - press simultaneously) and
disconnect the shoulder straps from each other (light grey parts) to be
able to attach the upholstery. Pull the two shoulder straps of the safety
belt through the upholstery from the back to the front then ensure that the
upholstery is correctly positioned. Push the seat drain plug through the
drain hole, which fastens the upholstery in place.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qibbel Front bike seat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qibbel Front bike seat in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info