675642
16
Zoom out
Zoom in
Previous page
1/224
Next page
PAIRING A BLUETOOTH DEVICE
The unit is designed to automatically go into pairing mode if there is no Bluetooth device connected. To Pair
your Bluetooth source:
1. Turn the unit and the Bluetooth device ON.
2. Make sure Bluetooth is enabled on the device to be Paired. The Bluetooth controls are typically found
in the device’s ‘Settings’ or ‘Connections menu.
3. On your devices list of discoverable devices, you should now see ‘Q M4-XXX’ where XXX is a pre-dened
three digit number. (Refer to Rear Panel section for the Bluetooth name label.)
4. Select ‘Q M4-XXX’ and your device will now be Paired via Bluetooth and Connected.
5. From within the music player on your device, select ‘Q M4-XXX’ as the audio output and press Play. Unless
the remote has been used to manually select another source and override Auto-Source Selection, the
unit will switch to Bluetooth input and the LED will turn Blue.
PAIRING A BLUETOOTH DEVICE WITH NFC
1. Turn the unit and the Bluetooth NFC device ON.
2. Make sure Bluetooth and NFC are enabled in the device settings.
3. Place NFC device on the top surface of the unit, in the location indicated.
4. The NFC device will automatically register on screen when an NFC connection has been made.
5. Follow on-screen instructions to complete NFC pairing. This usually involves selecting to allow NFC
pairing.
6. Your device will now be paired, and connected via Bluetooth, and will function as any other Bluetooth
source when pressing play from within the device music player.
Please Note:
Although starting to Play a track on the connected source will cause the unit to switch to Bluetooth, the unit will stay on
Bluetooth until the source is disconnected. It will not switch to another source whilst the player is paused.
Please Note:
You may need to rotate your device for NFC to connect, as NFC coil is in dierent locations within dierent devices.
Please see your device instruction manual for correct NFC operation.
The distance for NFC pairing occurs vary from device to device.
16
SOURCE VOLUME CONTROL
Audio sources will initially be set at a DEFAULT volume level. The volume can be adjusted separately for
each source using the VOL + and VOL – buttons on the top panel or IR remote. Once adjusted, the unit will
remember the new volume level for the currently selected source, and will return to that level each time
that source is re-selected.
Instructions
NFC Pairing Position
120 mm
75 mm
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Q Acoustics Media 4 - Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Q Acoustics Media 4 - Soundbar in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info