675642

Q Acoustics Media 4 - Soundbar Manual

15
Zoom out
Zoom in
Previous page
1/224
Next page
15
Instructions
POWER AND STANDBY
Power on the unit at the AC SWITCH once all rear panel audio connections are made. The speakers will enter
STANDBY, with a RED status LED.
Exit STANDBY by pressing the STANDBY button on either the top panel or the IR remote. The LED will
initially turn Green but may then change according to the Auto-Source Selection rules.
If NO input signals are detected, the unit will automatically enter STANDBY after 20 minutes.
AUTO-ON FUNCTION
When connected to an optical source, the unit has an AUTO-ON function and will come out of standby
when it detects that an optical signal is present. This allows easy integration of the unit with your television,
automatically turning on when you bring your TV out of standby.
AUTO-SOURCE SELECTION
In normal operation the unit will automatically select the audio source. A connected Bluetooth source that
starts to play has the highest priority, followed by Digital and nally Analogue:
Operating Q M4
Bluetooth
NFC Bluetooth
*
Optical input
Line in 2
Line in 1
Standby
INPUT
PRIORITY
*
A Bluetooth device connected via NFC
will take priority over all other sources.
The Auto-Source Selection can be manually overridden at any time using SOURCE SELECT on the IR remote
or by a short press of the button on the unit.
Important Note:
The unit will stop using Auto-Source Selection when the source is manually selected using the Source Select button on
the remote, or a short press of the Standby Button on the unit. Auto-Source Select will resume once the unit has been
put into and out of Standby.
Please Note:
If you place the unit in standby while an optical source is still present, the auto-on function will be disabled until the
optical source is turned o. This will prevent the unit from unwanted auto-on.
Please Note:
Some televisions continue their optical output when the TV is in standby. The unit will not auto-standby under these
circumstances and the standby control must be used.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Q Acoustics Media 4 - Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Q Acoustics Media 4 - Soundbar in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info