458588
9
Zoom out
Zoom in
Previous page
1/16
Next page
ASSEMBLY INSTRUCTIONS
Step 1. Assemble Frame Pieces
Pictures in A,B & C show the Trainer unfolded for part
clarication. Assembly will be easier if the Home Train-
er is left in the storage (closed) position until Step D.
A. Place the Rear, short folding leg of the Main Frame
(12) into the Middle Pulley Bar (Curved Leg) (37).
Make sure the bolt holes in this leg are closest to the
bolt holes in the Middle Pulley Bar insert. Secure with
4x Allen Bolt M8 (56) and 4x Washers (55).
B. Place the front lower end (seat cushion without
logo) of the Main Frame (12) into the Lower Pulley
Bar (Bar with 2x large holes) (5). Make sure cord ends
on Lower Bar are facing out to same side as the seat
cushion. Secure with 4x Allen Bolt M8 (56) and 4x
Washers (55).
C. Place the Upper end of the Main Frame (12) into
the High Pulley Bar (Bar with 2x small holes) (22).
Secure with 4x Allen Bolt M8 (56) and 4x Washers
(55).
D. Unscrew the Locking Knob (18) on the side of the
Rear Leg. Keeping your foot securely on the Rear
Leg, slowly extend the front Leg forwards. Once the
Home Trainer is fully open, secure the Locking Knob.
Be careful when releasing tension that the
Knob is fully locked and the Trainer does not sud-
denly close.
E. Flip down the Seat Adjustment Bar (7) and insert
into the appropriate slot in the Main Frame (12).
F. Insert the Foot Plate (1) to the Low Pulley Bar (5).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure X series 8533HT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure X series 8533HT in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info