Manual Pulsar DIGISIGHT N770A (page 7 of 44) (English, German, French, Italian, Spanish)

621720

Zoom out

Zoom in

1/44

Exit the menu option “Zeroing” by holding the “M” button pressed for one

second. The reticle will now move to the point of impact.

Make another shot - the point of impact should now match the aiming

point.

The riflescope should now be zeroed-in for the specified distance.

Main menu includes the following options:

Reticle selection in the riflescope’s memory

Weapon selection

“One shot zeroing” mode (refer to section 10 for details)

Video output selection/disable

Clock set up

Activation of wireless remote control (see section 15 for details).

Note: the aiming reticle can move only

within the red limiting frame (see pic.) that

defines the click range – 80 clicks

horizontally, and 100 clicks vertically

(models 76312A/76315A); 120 clicks

horizontally, and 100 clicks vertically

(models 76317UA/76318UA).

Follow first four steps, set forth in subsection “Traditional zeroing”.

Take a shot. If the point of impact does not match the target centre push the

“M” (5) to enter main menu and choose with (6,7) buttons menu

option “Zeroing” marked by icon.

On the right of the icon appears icon ; auxiliary cross (C) appears in

the centre of the aiming reticle.

Holding the reticle in the aiming point, by rotating the windage/elevation

knob (10) move the auxiliary cross (С) horizontally or vertically relative to

the reticle until the auxiliary cross matches the point of impact (P) (see

pic.). To switch between movement direction push the knob (10) to hear a

click. When moving directions of the reticle changes, the active coordinate

changes its colour from white to red.

One shot zeroing:

To do this, unscrew the knob cover (9), push the knob (10 ) to hear a click.

First push of the knob enables vertical movement of the reticle ( ), appears

on the data panel), second push enables horizontal movement (icon ).

Another push of the knob lets you quit this mode.

Check the accuracy of your adjustments by firing 3 or 4 control shots.

The scope should now be zeroed-in for the specified distance.

◄

►

X=21

Y=19

Note: zeroing parameters (coordinates X;Y) are saved in the riflescope’s

memory as number 1 in the menu option “Weapon choice”. If you want

to zero in the riflescope using another weapon or another distance, select

option 2 or 3 (details in the menu option “Weapon choice” section 11)

and do the zeroing.

Menu operation

Short or long press of navigation buttons - switching between menu

options.

Short press of the button “M”– entering the menu and submenu,

confirmation of choice.

Long press of the button “M”– exiting the menu and submenu

(depending on the cursor position).

Reticle selection in the riflescope’s memory

This menu option allows selection of one of the reticles saved in the

riflescope’s memory .

Choose the icon and press “M”.

Press buttons to select a reticle from the list (reticle name is shown

next to its order number).

Confirm your choice by pressing the button “M”.

List and description www.pulsar-nv.com of the reticles can be found at

◄

►

Weapon choice

This menu option allows selection of three variants of zeroing parameters

for various types of weapons or for various distances.

Select icon with the buttons , then choose a number out of the

list (1; 2; 3).

Confirm your choice by pressing the button “M”. The number of the

selected variant of the weapon (distance) to use is shown on the data

panel in the lower portion of the display.

Note. Originally the reticle for all the three variants is located in the

display centre (coordinates X=0;Y=0). Further on, each type of weapon

(distance) requires individual zeroing.

◄

►

IMPORTANT!

Please note that due to peculiarities of OLED display technology

(models 76312A and 76315A), after upload of a new reticle, you may

notice on the riflescope's display residual “ghost image” of the

previous reticle.

The “ghost image” looks like semitransparent white lines. The

image may appear if a new reticle does not contain elements (such

as lines, circles, bars etc.) of the previous reticle. After a while the

“ghost image” becomes less noticeable.

We do not take any responsibility for the claims in connection with

“ghost image” arisen due to multiple change of reticles.

Como posso receber este manual em Português
no meu Email . gonsalves.antonio@hotmail.com Submitted on 26-4-2022 at 21:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar DIGISIGHT N770A in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pulsar DIGISIGHT N770A Manual

Product: