Manual Proxxon TG 125-E (page 11 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

782214

Zoom out

Zoom in

1/68

- 11 -

Translation of the Original Operating Instruc-

tions TG 125/E disc grinding machine

Contents:

1 General view (fig. 1) 11

2 Description of the machine 11

3 Scope of delivery 12

4 Technical data 12

5 Before work 13

5.1 Setting up your disc grinding machine

(fig. 2): 12

5.2 Removing and inserting the grinding

table (fig.3): 13

5.3 Affixing and replacing grinding wheels

(fig. 4): 13

5.4 Adjusting the grinding table angle

(fig. 5): 14

5.5 Connecting the dust exhaust

(fig. 6): 14

6 Working with the TG 125/E disc

grinding machine 14

6.1 Working with the angle stop (fig. 7): 14

6.2 Notes on grinding speed 15

7 Care and maintenance 15

8 Disposal 15

9 CE conformity declaration 15

Dear customer!

Using these instructions

• makes it easier to get familiar with the device

• prevents malfunctions caused by improper han-

dling, and

• lengthens the service life of your device.

Please keep these instructions readily accessible at

all times.

Use the device only when you have understood it

exactly and always adhere to the instructions.

PROXXON is not liable for the safe functioning of the

device in cases of:

• handling that does not conform to the usual usage,

• purposes of use not designated in the instructions,

• disregard of the safety instructions.

You are not entitled to guarantee claims in cases of:

• operator errors,

• inadequate maintenance.

For your own safety, please follow the safety instruc-

tions exactly.

Use only genuine PROXXON replacement parts.

We reserve the right to make improvements in the

sense of technical progress. We wish you much suc-

cess with the device.

WARNING!

Read all safety warnings and instructions.

Failure to follow all safety warnings and

instructions listed below may result in electric shock,

fire and/or serious injury.

KEEP ALL SAFETY WARNINGS AND

INSTRUCTIONS FOR THE FUTURE!

Do not use damaged bits and cutters. Before each

use, inspect bits and cutters such as sanding

discs for chips and cracks, grinding discs for

cracks, strong wear or tear. After you have

inspected and installed the bits and cutters, keep

yourself and any other persons in the vicinity

away from the plane of the rotating bits and cut-

ters and run the device at maximum rotational

speed for one minute. Damaged bits and cutters

usually break during this test time.

1 General view (fig. 1)

1. Grinding disc

2. Swivel-mounted grinding table

3. Rotary knob for speed control

4. On-off switch

5. Angle stop

6. Mains cable

7. Connecting piece

8. Guide slot for angle stop

9. Clamp

10. Locking button for angle adjustment

11. Grinding discs

13. Rubber connector

2 Description of the machine

Thank you for purchasing the TG 125/E disc grinding

machine. You now own a high-precision machine to

use in grinding work for which complete accuracy is

required.

A high-precision manufactured and carefully bal-

anced grinding disc with double ball-bearing direct

drive guarantees excellent smoothness, precision

concentricity and minimum wear.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon TG 125-E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3.16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon TG 125-E Manual

Product: