782209
6
Zoom out
Zoom in
Previous page
1/16
Next page
- 6 -
Table 1
Minimum gage for cord
AmpereRating Volts Total length of cord in feet
120 V25 ft.50 ft.100 ft.150 ft.
240 V50 ft.100 ft.200 ft.300 ft.
MoreNot MoreAWG
ThanThan
06 18 161614
61018 1614 12
1012161614 12
121614 12Not Recommended
Note:
Keep this instruction manual in an easily accessible place.
Only operate this machine if you are qualified to do soand
follow the guidelines in this instruction manual.
PROXXON does not accept responsibility for the safe
functioning of the machine
if it is handled in amanner whichconstitutes improper
use,
if it is used for other purposes whichare not specified in
the instruction manual,
if the safety regulations are not observed.
Warranty claims are invalid if
the machine is incorrectly operated,
the machine has not been sufficiently maintained.
In the interests of your safety,pleasealways observe the
safety regulations.Only use genuine PROXXON spare parts.
We reserve the right to make further alterations for the
purpose of technical progress.We wish you every success
with your machine.
Description of the machine
The PROXXON KT 230 Compound Table and the PF 230
Milling Machine are ideally suited to the machining of
plastics,light metals or steel. When working with the
compound table,pleasealways observe the safety
regulations for the drilling or milling machine which is in use
and please remember that the compound table and milling
machine are precision tools.Therefore,pleasealways work
with duecare.
W arning:
This Milling machine for indoor use only.Do not expose to
rain or use in damp locations!
W arning:
Do not attempt to modify this tool or createaccessories not
recommended for use with this tool. Any suchalternation or
modification is misuseand could result in hazardous
condition leading to possible serious injury!
W arning:
While using the compound table always follow the security
instructions of the used drilling or milling device!
We offer you the following options for the 230 fine milling
system:
KT 230:
•Operating instructions and safety regulations
•Compound-type table
PF 230:
1. Milling spindle, complete with motor and belt
transmission
2.Pillar (Ø 34mm)
3.Mounting block for lathe (not included in FF 230)
4. Collet chucks Ø 6,8, and 10 mm incl. union nut
5. Milling table withT-grooves (not included in FF 230)
6.Auxiliary tools
7.Operating instructions and safety regulations
FF 230:
1. Comprises the PF 230 milling assembly complete with
KT 230 compound-type table, but without groove table,
item 16 in Fig. 1.
General view, PF 230 milling machine (Fig. 1)
1. Motor
2.Cover
3.On / Off switch
4. Speed Table
5. Motor mounting screw
6.Knurled screw for cover
7.Union nut for collet chuck
8. Clamp screw for sleeve
9. Scale for depthadjustment
10.Drill lever
11. Pillar (Ø 34mm)
12.Mounting block for lathe
13.Handwheel for height adjustment
14. Screw for height adjustment
15. Scale for angle adjustment
16.Milling table for lathe PD 230/E
(Not included withFF 230 milling machine, but only
withPF 230)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon FF 230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon FF 230 in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info