490627
12
Zoom out
Zoom in
Previous page
1/88
Next page
12
If foam appears, stop work immediately
and empty the tank.
Vacuuming up hazardous materials can lead
to serious or even fatal injuries.
The following materials must not be picked
up by the vacuum cleaner:
- hazardous dust
- hot materials (burning cigarettes, hot
ash, etc.)
- À ammable, explosive, aggressive liq-
uids (e.g. petrol, solvents, acids, alkalis,
etc.)
- À ammable, explosive dust (e.g. magne-
sium or aluminium dust, etc.)
The use of non-genuine spare parts and
accessories can impair the safety of the
appliance.
Only use spare parts and accessories from
PROTOOL.
Store the appliance in a dry place, protect-
ed from frost.
Materials picked up can present a hazard
to the environment.
Dispose of the dirt in accordance with legal
regulations.
Unauthorised modi¿ cations to the appli-
ance, the use of incorrect brushes in addi-
tion to using the appliance in a way other
than for the intended purpose exempt the
manufacturer from any liability for the re-
sulting damage.
5 Before starting the
cleaner
Assembling the vacuum cleaner
Taking accessories out of the packaging
Take vacuum cleaner and accessories out
of the packaging.
The mains plug should not yet be inserted
into a socket.
Open the retaining clamps [1-2] and remove
the upper section of the vacuum cleaner.
Take the accessories out of the dirt tank
and the packaging.
Inserting the ¿ lter bag (¿ gure [2])
The mains plug should not yet be inserted
into a socket.
Open the retaining clamps [1-2] and remove
the upper section of the vacuum cleaner.
Insert the ¿ lter bag into the dirt tank.
Press the ¿ lter bag connection ¿ rmly on to
the inlet ¿ tting.
Attach the upper section of the vacuum
cleaner.
Close the retaining clamps [1-2]. Ensure
that the retaining clamps ¿ t properly.
6 Control / Operation
6.1 Connections
Connecting the suction hose
Connect the suction hose.
Electrical connection
Equipment marked with 230 V can also be
connected to 220 V / 240 V.
Ensure that the cleaner is switched off.
Insert the power cord into a properly in-
stalled and fused socket with earthing con-
tact.
6.2 Switching on the vacuum
cleaner
Switching on the vacuum cleaner
Bring the switch in the position “I”. The
suction motor starts running.
Switching on the vacuum cleaner
with electric tools (¿ gure [3])
Bring the switch in the position “0”.
Connect the electric tool to the instrument
socket on the control panel.
Bring the switch in the position “II”.
Switch on the power tool.
The vacuum cleaner motor starts when the
connected power tool is switched on. When
the power tool is switched off, the vacuum
cleaner is switched off as well.
Exhaustion of liquids
CAUTION!
It is forbidden to exhaust inÀ ammable
liquids!
Before exhausting liquids the ¿ ltration bag
must always be taken out!
If foam starts to be formed ¿ nish the job
immediately and empty the waste vessel.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP 10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 10E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info