Manual Protool VCP 10E (page 11 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

490627

Zoom out

Zoom in

1/88

3 Intended use

The vacuum cleaner is intended for the us-

age for households, for wet cleaning, and

may serve for sucking function of electric

appliances as well.

It is forbidden to suck inÀ ammable or ex-

plosive materials (e.g. petrol, oil, solvents,

alcohol).

Danger of explosion and ¿ re. Do not suck

stone or concrete dust!

4 Safety instructions

Prior to using the appliance for the ¿ rst

time, be sure to read this document through

and keep it ready to hand.

The appliance must only be used by per-

sons, who have been instructed in its cor-

rect usage and explicitly commissioned with

the task of operating it.

The appliance must only be operated under

supervision.

The appliance must not be used by children.

Do not use any unsafe work techniques.

Never extract dust without a ¿ lter or if the

¿ lter is damaged.

Check that the À oat functions correctly.

For appliances that are connected to the

appliance plug socket, you must read the

accompanying operating instructions and

the safety information contained in these

operating instructions.

Only carry out maintenance work if it is

described in the operating instructions.

Risk of personal injury, short circuit risk.

Switch off the appliance and disconnect the

mains plug in the following situations:

- Prior to cleaning and servicing

- Prior to replacing components

- Prior to changing over the appliance

- If foam develops or liquid emerges

Besides the operating instructions and the

binding accident prevention regulations val-

id in the country of use, observe recognised

regulations for safety and proper use.

Before transporting the dirt tank, close all

the locks.

Do not tilt the cleaner if there is liquid in

the dirt tank.

Do not use a crane hook to lift the cleaner.

Never spray water on to the upper section

of the vacuum cleaner.

Connectors and couplings of power supply

cords and extension leads must be water-

tight.

Contact with live components leads to seri-

ous or even fatal injuries.

As an extension lead, only use the version

speci¿ ed by the manufacturer or one of a

higher quality.

When using an extension lead, check the

minimum cross-sections of the cable:

Cable length Cross section

< 16 A < 25 A

up to 20 m 1.5 mm

2.5 mm

20 to 50 m 2.5 mm

4.0 mm

Arrange the electrical parts (sockets, plugs

and couplings) and lay down the extension

lead so that the protection class is main-

tained.

It is recommended that the vacuum cleaner

should be connected via a residual current

circuit breaker.

Touching a faulty mains connecting lead can

result in serious or even fatal injuries.

Do not damage the mains power lead (e.g.

by driving over it, pulling or crushing it).

Regularly check whether the power cord is

damaged or shows signs of ageing.

Have the faulty mains connecting lead re-

placed by your PROTOOL service represent-

ative or a quali¿ ed electrician prior to using

the appliance again.

The appliance socket is only designed for

the purposes de¿ ned in the operating in-

structions. The connection of different ap-

pliances can result in damage.

Prior to plugging in an appliance, always

switch off the vacuum cleaner and the ap-

pliance that is to be connected.

Read the operating instructions to the ap-

pliance to be connected and observe the

safety notes contained in these.

The appliance can be damaged as a result

of being connected to an unsuitable mains

voltage.

Ensure that the voltage shown on the rat-

ing plate corresponds to the voltage of the

local mains power supply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 10E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool VCP 10E Manual

Product: