Manual Protool RGP 80-11 E (page 13 of 148) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490681

Zoom out

Zoom in

1/148

Renovation Cutter

RGP 80-11 E

Table of contents

1 Symbols ................................... 13

2 Technical data ........................... 13

3 Prescribed usage ........................ 13

4 Control Elements ....................... 14

5 Notes on Safety Prevention ......... 14

5.1 General Safety Instructions ......... 14

5.2 Safety instructions for all work

activities ................................... 14

5.3 Additional safety instructions

for all types of works .................. 15

5.4 Supplementary safety instructions

for grinding and cutting .............. 16

5.5 Additional safety instructions

for surface grinding .................... 16

5.6 Additional safety instructions

for grinding with wire brush ......... 16

5.7 Turner safety instructions ............ 16

5.8 Noise / Vibration Information ........ 17

6 Activation ................................. 17

6.1 Switching on – off ....................... 17

6.2 Motor electronics ....................... 17

7 Milling tools ............................... 18

7.1 Choice of cutter and grinding

head ........................................ 18

7.2 Cutter / Grinding head change ...... 18

7.3 Replacing Grinding Wheels .......... 18

8 Operation ................................. 19

8.1 Suction system .......................... 19

8.2 Additional handle ....................... 19

9 Maintenance .............................. 19

10 Environmental Protection /

Disposal.................................... 20

11 Warranty .................................. 20

12 Declaration of Conformity ............ 20

1 Symbols

Double insulation

Warning of general danger

Risk of electric shock

Use protective goggles!

Wear ear protection!

Use protective gloves!

Read the instructions

Not to be included in municipal refuse

► Advice or tip

2 Technical data

Nominal voltage 230 V ~

Mains frequency 50 / 60 Hz

Power input 1100 W

Adjustable revolutions 2000 – 5900 min

–1

Tool diameter 80 mm

Weight 3.2 kg

Protection class II /

3 Prescribed usage

The machine works on the principle of an

angle grinder but uses also special tools

for milling and grinding, e.g. of concrete

and plaster.

The machine is intended for removal of

paint coats, plasters, residues of wall tile

and carpet adhesives mainly from rigid sur-

faces. In addition, the machine can be used

for roughing of ﬂ at concrete surfaces and

for milling of lining work transitions.

The user proper is responsible for improper

usage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool RGP 80-11 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool RGP 80-11 E Manual

Product: