490710
12
Zoom out
Zoom in
Previous page
1/92
Next page
Noise/vibration information
Guarantee
Repairs and servicing
Recycling
After their service life is ended, submit the
electric tool, its accessories and packages to a
disposal premise to allow reusing of the raw
materials.
To allow material-sorted recycling, all plastic
components are marked with relevant symbols.
Maintenance and care
Storage
Lift-off carbon brushes
12
GB
- The carpentry planer requires practically no
maintenance.
- Lubrication for the antifriction bearings is
designed to last for the service life of the
electric tool.
- However, it is recommended to remove
accumulated dust and chips regularly by
blowing compressed air through the motor
ventilation holes while the motor is running.
- The guide faces are to be kept clean from
resins and similar deposits.
- When working under extreme conditions, e.g.
planing wood with high contents of resins or
moisture, deposits accumulated inside the
electric tool can reduce effectiveness of dust
and chip extraction.
- Remove plug from the mains socket before
opening the housing cover (13).
- Cleaning, if necessary, may be carried out
after removing of the housing cover – loosen
the hexagon-head screw (25) using the
wrench (21).
- After the interior of electric tool has been
cleaned, replace the cover and tighten the
screw again.
Important:
The carbon brushes are specially designed to
allow their wear only to the minimum usable
length. Then the power supply circuit is
automatically interrupted and the electric tool
stops running.
Replacement of the carbon brushes is to be
carried out by specialized service personnel
only.
Packed electric tools may be stored in dry
unheated storerooms with temperatures not
dropping below - 5°C. Unpacked electric tools
shall be stored only in dry self-contained
storerooms with temperatures not dropping
below + 5°C, where sudden temperature
changes are prevented.
(Figure 1)
Repairs in the warranty and post-warranty
periods are carried out by the servicing
workshops listed in the index of addresses.
We guarantee PROTOOL appliances in
accordance with statutory/country-specific
regulations (proof of purchase by invoice or
delivery note).
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from the guarantee.
In case of compliant please send the machine,
undismantled, to your dealer or the Service
Centre for electric power tools.
Noise and vibration levels measured and
determined according to EN 50144.
The typical A-weighted noise levels of the
electric tool are:
Sound pressure level: 96 dB(A)
Sound power level: 109 dB(A)
The typical level of hand-arm vibration is less
than
Sound pressure level: 92 dB(A)
Sound power level: 105 dB(A)
The typical level of hand-arm vibration is less
than
PLP 205:
Use ear protection!
PLP 245:
Use ear protection!
2,5 m/s .
2,5 m/s .
2
2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool PLP 205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool PLP 205 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info