79301
12
Zoom out
Zoom in
Previous page
1/104
Next page
12
Technical data – QuaDrive
Cordless drill – Original instruction DRC 12-4 TEC DRC 18-4 TEC
Motor voltage 10.8 V 18 V
Idling speed* 1
st
gear 0 – 400/min 0 – 400/min
2
nd
gear 0 – 850/min 0 – 850/min
3
rd
gear 0 – 1850/min 0 – 1850/min
4
th
gear 0 – 3800/min 0 – 3800/min
Torque – screwing into soft/hard material 25/45 Nm 40/60 Nm
Adjustable torque** 1
st
gear 0.75 – 12 Nm 0.75 – 12 Nm
2
nd
gear 0.6 – 7.5 Nm 0.6 – 7.5 Nm
3
rd
gear 0.55 – 5 Nm 0.55 – 5 Nm
4
th
gear 0.5 – 2.7 Nm 0.5 – 2.7 Nm
Chuck clamping range 1.5 – 13 mm 1.5 – 13 mm
Max. drill diameter in wood 50 mm 50 mm
in metal 12 mm 12 mm
Screws in spruce max. diameter 8 mm 10 mm
Tool holder in drill spindle ¼ ¼
Weight without battery, with CENTROTEC 1.6 kg 1.9 kg
Accessories
Charger BC 3
Mains voltage (input) 230 240 V ~
Mains frequency 50 / 60 Hz
Charging voltage (output) 7.2 18 V =
Rapid charging max. 3 A
Conservation charging current, pulsating approx. 0.06 A
Charging times for:
LiIon 3.0 Ah 80% approx. 50 min. 100% approx. 65 min.
Permitted charging temperature range 5 °C to +45 °C
Temperature monitoring via NTC resistor
DRC 12-4 TEC battery packs BP 12 LiIon
Voltage 10.8 V
Capacity 3.0 Ah
Weight 0.450 kg
DRC 18-4 TEC battery packs BP 18 LiIon
Voltage 18 V
Capacity 3.0 Ah
Weight 0.715 kg
* Speed speci cations with fully charged battery pack.
** The maximum speed is reduced in the lower torque stages.
The speci ed illustrations are at the beginning of this operating manual.
1 Symbols
Warning of general danger
Risk of electric shock
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
GB
12


Need help? Post your question in this forum.

Forumrules
1

Forum

protool-drc-12-4-tec-li

Reset search

  • CA BE REPEATED FOR DRILLING MACHINE RUN FOR 2 SECOND THEN STOP. THIS CAN BE DONE NUMEROUS TIMES. BATTERY CHARGER INDICATES THAT BATTERIES ARE FULLY CHARGED. BEEN INACTIVE NOW FOR 3 YEARS AND STILL REPEAT THE SAME PROBLEM. Submitted on 11-1-2023 at 12:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool DRC 12-4 TEC LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool DRC 12-4 TEC LI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info