Manual Protool CSP 56 (page 21 of 136) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

110272

Zoom out

Zoom in

1/136

11 Environmental

Protection/Disposal

Power tools, accessories and packaging

should be sorted for environmental-friendly

recycling.

Only for EC countries:

Do not dispose of power tools into

household waste!

According to the European Directive

2002/96/EC on waste electrical and elec-

tronic equipment and its incorporation into

national law, power tools that are no longer

suitable for use must be separately collect-

ed and sent for recovery in an environmen-

tal-friendly manner.

REACh

REACh is a European Chemical Directive

that came into effect in 2007. As “down-

stream users” and product manufacturers,

we are aware of our duty to provide our

customers with information. We have set up

the following website to keep you updated

with all the latest news and provide you

with information on all the materials used

in our existing products:

http://www.tts-protool.com/reach

12 Warranty

For our tools, we give warranty for material

and production defects in accordance with

the locally applicable legal provisions, but

in any case for at least 12 months. Within

the EU member states, the warranty period

is 24 months (veriﬁ cation through invoice

or delivery note).

Damage caused by, in particular, natural

wear, overloading, incorrect handling, or

damage caused by the operator, or dam-

age caused through use of the equipment

contrary that speciﬁ ed in the Operating In-

structions, or damage which was known at

the time of purchase, is not covered by the

warranty. Furthermore, damage caused by

the use of non-original PROTOOL accesso-

ries and consumable material (e.g. sanding

pads) is also excluded.

Complaints can only be recognised if the

tool is returned while still assembled to the

supplier or an authorised PROTOOL Cus-

tomer Service workshop. Keep the Operat-

ing Instructions, Safety Instructions, Spare

Parts List and purchase receipt in a safe

place. Otherwise the respective, current

warranty condi tions of the manufacturer

shall apply.

Note

Due to continuous research and develop-

ment work, we reserve the right to make

changes to the technical content of this

documentation.

13 Declaration of

Conformity

Hand Circular Saw Serial no.

CSP 56-2 EB 637 846, 638 203

We declare under our sole responsibility

that this product is in conformity with the

following standards or standardization doc-

uments:

EN 50 366, EN 55 014-1, EN 55 014-2,

EN 60 745-1, EN 60 745-2-5, EN 61 000-3-2,

EN 61 000-3-3 according to the provision

of the regulations stipulated in Directive

2006/42/EC, 2004/108/EC.

All the procedures were applied as validly

amended at the time of the issue of this

declaration, without quoting these.

Technical documentation is kept at the manu-

facturer.

Stanislav Jakeš

Research and development

Protool GmbH

Wertstr. 20

D-73240 Wendlingen

30. 04. 2010

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP 56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool CSP 56 Manual

Product: