110274
16
Zoom out
Zoom in
Previous page
1/110
Next page
16
Saw Blade Removal
Swing the swinging guard [1-7] back with
the lever [1-5] and place on the ring span-
ner [2-3].
Unscrew the clamping screw [2-4] with the
Allen key [2-2].
Remove the clamping ange [2-6] and the
saw blade [2-7].
WARNING
Observe for installation: The cutting
direction of the teeth (arrow on the
saw blade) must match the direction
of the arrow on the guard.
Check the function of the swinging
guard.
8 Operating Instructions
Secure the work on a rm support.
Do not cut into nails, screws, etc.
Do not work with materials containing
asbestos.
Do not use saw blades that have cracks
or that are damaged.
Under no circumstances use abrasive
disks!
Saw blades of highly alloyed, high-speed
steel (HSS-steel) must not be used.
Feeding too fast signi cantly reduces the
performance of the machine and short-
ens the life of the saw blade.
Use only sharp saw blades in perfect con-
dition.
Uncoated saw blades can be protected
from corrosion with a thin coat of acid-
free oil.
Resin and glue on the saw blade cause
poor cutting results. Therefore, clean the
saw blade immediately after use.
9 Maintenance
- The unit should be stored in a dry place
where it is protected against freezing.
WARNING
To verify that the protective insulation
remains intact, the machine must be
subjected to a technical safety test
afterwards. For this reason, this work
must be performed exclusively by a
professional electro-workshop.
- With each changing of the saw blade, re-
move deposited saw dust from the inside
of the protective guard.
- The ventilation slots on the motor casing
should be cleaned out from time to time.
After an operating period of approx. 200
hours, the following maintenance work
must be performed:
- Check the motor brushes and replace if
necessary. Clean the motor housing.
10 Environmental
Protection/Disposal
Power tools, accessories and packaging
should be sorted for environmental-friendly
recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and elec-
tronic equipment and its incorporation into
national law, power tools that are no longer
suitable for use must be separately collect-
ed and sent for recovery in an environmen-
tal-friendly manner.
REACh
REACh is a European Chemical Directive
that came into effect in 2007. As “down-
stream users” and product manufacturers,
we are aware of our duty to provide our
customers with information. We have set up
the following website to keep you updated
with all the latest news and provide you
with information on all the materials used
in our existing products:
http://www.tts-protool.com/reach
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool CSP 55-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP 55-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info