Manual Protool CSP 55-2 (page 15 of 110) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

110274

Zoom out

Zoom in

1/110

7 Adjustment

WARNING

Risk of electric injury.

► Before any manipulation with the tool

make sure to unplug the mains socket

outlet.

7.1 Cutting Depth Adjustment

Loosen the winged screw [1-12].

Set the required depth on the cutting depth

scale [1-13]. The bottom edge of the blade

guard can be used as a reference point for

this.

Raise: smaller cutting depth

Lower: larger cutting depth

Retighten the winged screw. To achieve the

best cutting results, the saw blade should

protrude from the material by no more than

3 mm.

7.2 Cutting Angle Adjustment

Loosen the winged screw [1-9].

Set the cutting depth on the scale to the

required value (the cutting angle scale is

marked in 1°-steps).

Retighten the winged screw [1-9].

WARNING

For mitre cuts, the cutting depth does

not correspond to the value indicated

on the cutting depth scale.

7.3 Cutting Edge Indicator

The cutting mark 0° indicates the position

of the saw blade for right angle cutting.

The cutting mark 45° indicates the position

of the saw blade for 45°cutting.

°°

7.4 Parallel Guide

The parallel guide with scale [2-1] is insert-

ed in the holders on the foot plate [1-6] and

secured with the winged screw [1-10]. The

parallel guide makes possible exact cuts

along a workpiece edge or the cutting of

parallel strips. The maximum cutting width

that can be set is approx. 200 mm.

7.5 Dust Extraction

CAUTION

Inhaled dust may damage the air pas-

sages.

► Tools should be permanently connected

to the dust exhausting plant.

► Wear respirator if you work with dust.

The extraction hose of a commercial vac-

uum cleaner can be connected to the ma-

chine via the connection neck [1-3].

7.6 Replacing the Saw Blade

WARNING

Before exchanging the saw blade, pull

the mains plug from the power sup-

ply socket.

Wear protective gloves!

Saw Blade Installation

The sawing performance and the quality of

the cut depend essentially on the condition

and tooth form of the saw blade. Therefore,

use only sharp saw blades that are suitable

for the material to be worked.

Install a suitable saw blade according to the

illustration and tighten. Take care that the

mounting ﬂ ange [2-8] and the clamping

ﬂ ange [2-6] are correctly positioned.

Observe for installation: The cutting direc-

tion of the teeth (arrow on the blade guard)

must match the direction of the arrow on

the guard.

Check the function of the swinging guard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP 55-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool CSP 55-2 Manual

Product: