490662

Prosun X5 Manual

13
Zoom out
Zoom in
Previous page
1/55
Next page
13
Cleaning the machine:
Always disconnect the main power from the unit before attempting to clean or
repair it.
Dust the lamps with a dry cloth - do not use cleaning fl uid or alcohol. The
acrylics should be taken out at least once every week of operation and
cleaned thoroughly with a nonalcoholic disinfectant glass or surface cleaner. If
alcohol is used, the acrylic may fade, crack, or break altogether. Failure to use
anything other than an approved cleaning material on the acrylic will result in
poor UV-transmission, and could eventually cause injury to the person using
the machine. Use a vacuum cleaner with a dust nozzle to clean
around the ballast racks and throughout the interior portions of the base, top
deck, and bench.
Longevity of the acrylic sheets
The acrylic sheets used in this machine should be changed between 1200
and 1500 hours of operation. If not, UV-transmission could be greatly re-
duced.
ProSun, recommends the use of Lucasol or Solacryl when cleaning acrylic
sheets
Longevity of the lamps
Most lamps will display up to 120% of rated output during the fi rst 50 hours of
illumination. As such, exposure schedules should be reduced by 20%, or
sunburning may occur. After the initial 50 hours, the lamps will run at 100%
of their rated output and gradually go down from there, until about 800 hours,
whereupon the lamps should be replaced.
• IMPORTANT: When replacing or cleaning Facial Lamps, facial lenses and
bulbs should be cleaned
with alcohol, being free of smudges and fi nger prints
Please note:
ProSun recommends changing facial fi lter glass after every 1000 hours of use
to maintain peak performance and safety of your tanning equipment.
WARNING DANGER
NEVER use this unit if the blue fi lter glass is missing, cracked or otherwise
damaged. SEVERE INJURY may result within seconds.
We recommend changing blue fi lter glass after 1,000 hours of use.
What to do with old lamps?
Contact your local garbage disposal company or city authority to fi nd out what
is the most environmentally sound manner of throwing away old fl uorescent
lamps.
MAINTENANCE
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosun X5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosun X5 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info