Manual Prosun 3000 Series (page 10 of 17) (English)

490657

Zoom out

Zoom in

1/17

THE TANNING PROCESS

The sunbed you have purchased is designed to concentrate optimal levels of UVA, in

conjunction with very low percentages of UVB, on the outermost layers of the skin, so as

to stimulate the production of Melanic pigment, which is slightly pink in its dormant

state, and cause it to turn brown after excretion. The more Melanin cells present in the

skin determines the amount of pigment that will be excreted and distributed, and

therefore the extent of the tan.

A COMPREHENSIVE GUIDE TO RESPONSIBLE

TANNING:

1. Depending upon skin type, tanning “treatments, each consisting of 10 to 12 individual

sessions, taken over a period of 20 to 24 days, should be embarked upon. No more than 2

of these treatments per week should be undertaken, for more in-depth details for tanning

see the schedule label on bed.

2. Allow at least 24 hours to pass between each tanning session.

3. If you are taking any kind of medication, or are wearing facial cosmetics, make sure to first consult your

doctor before tanning. Certain ingredients in pharmaceutical products and make-up could induce UV light

sensitivity and cause allergic reactions. A table describing a number of known allergens can be seen later

in this manual.

4. For best facial tanning results, make sure to clean the face of cosmetics thoroughly at least three hours

before each session. Better still, if possible, try not to wear any make-up during the day of the session.

5. Don’t use tanning lotions, oils or gels which contain SPF (sun protection factor), as these could hinder

the desired tanning effect. Use only those that are specifically manufactured for use in sunbeds.

6. If your skin develops or displays any sort of undesired reaction such as a rash, acne, or

unusual dryness, stop tanning immediately. If the problem doesn’t clear itself up within a

couple of days, consult your doctor.

7. Always avoid sunburn. If you overexpose yourself you could erythemize (sunburn)

the skin. Should this occur, stop tanning until the reddish color fully subsides, then

recalculate your exposure schedule before continuing the treatment.

8. Read the WARNING label situated in full view of the user on the outside of the sunbed

carefully before beginning a tanning session.

9. Never use “tanning accelerator” pills in conjunction with your tanning treatment, as

these could lead to an increase of skin sensitivity to sunburn.

REVISED: 11/20/01 Page 9

I have a 2004 Prosun tanning bed model 3000 I just moved it. When I plug it in the display says (81.6) and beeps. It won't turn on. What might be the issue? Submitted on 9-8-2023 at 18:40
Reply Report abuse
I have a 2004 Prosun tanning bed model 3000. We just moved it. When I plug it in the display beeps and says (81.6) It won't turn on. What is the issue with it? Submitted on 9-8-2023 at 18:38
Reply Report abuse
My tanning bed is beepiing and looks like a code 81.6 and Submitted on 18-8-2019 at 06:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Prosun 3000 Series in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Prosun 3000 Series Manual

Product: