773031
86
Zoom out
Zoom in
Previous page
1/288
Next page
28E N E N
5. Replace the brake linings
65
.
6. Insert the safety pin
64
again and bend the open end over so
that the pin cannot come free of the holder. Use suitable tools
for this (e.g. pliers).
7. Attach the calliper by tightening the two screws
62
/
63
with
a 5 mm hexagonal socket wrench.
8. Actuate the respective brake several times in order to centre
the new brake linings in the brake calliper. If there are still any
grinding sounds, adjust the brake as described.
MECHANICAL DISC BRAKE
SETTING THE DISC BRAKE
Settings usually are not necessary at the disc brake system. The brake linings centre inde-
pendently by actuation of the brake levers.
REPLACING THE BRAKE LINING
1. Loosen the two clamp screws
66
/
69
of the brake calliper with a 5 mm hexagonal socket
wrench.
2. Take the brake calliper off from the brake disc.
3. Straighten the curved end of the safety pin
67
. Use a suitable tool for this (e.g. pliers).
4. Pull out the safety pin
67
.
5. Replace the brake linings
68
.
6. Insert the safety pin
67
again and bend the open end over so that the pin cannot come free
BRAKE
64
65
DANGER OF ACCIDENT!
The maximum brake output is only achieved after a few brake processes
with a new brake disc or brake linings!
The brake disc will grow very hot when braking and may cause burns. The
disc edges may also be very sharp and cause cutting injury. Therefore, do
not touch them while the disc is hot or turning.
DANGER
DANGER OF ACCIDENT AND DAMAGE!
Replace the brake linings when their thickness is less than 0.5 mm. The bra-
ke output may otherwise drop to complete loss of the brake force and the
brake system may be damaged.
DANGER
62
63
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Bike 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Bike 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info