773031

Prophete Bike 2020 Manual

85
Zoom out
Zoom in
Previous page
1/288
Next page
English
E N 27
7. Insert the new brake pads
61
into the holder until they latch.
8. Install the wheel again if you removed it.
9. Push the brake cylinder
59
onto the cantilever socket
58
.
10. Close the quick-clamping lever
60
by pushing it up (CLOSE). If the lever
closes too easily, the quick-clamping screw must be adjusted.
SETTING THE QUICKCLAMP
1. Push the lever
60
of the quick-clamp down to open it (OPEN).
2. Turn the quick-clamping screw in 1/4 turn clockwise.
3. Close the quick-clamping lever
60
by pushing it up (CLOSE).
4. Repeat the process if the lever still closes too easily.
HYDRAULIC DISC BRAKE
SETTING THE DISC BRAKE
Settings usually are not necessary at the hydraulic disc brake system. The brake linings centre in-
dependently by actuation of the brake levers.
REPLACING THE BRAKE LINING
1. Loosen the two clamp screws
62
/
63
of the brake calliper with a 5 mm hexagonal socket
wrench.
2. Take the brake calliper off from the brake disc.
3. Straighten the curved end of the safety pin
64
. Use a suitable tool for this (e.g. pliers).
4. Pull out the safety pin
64
.
BRAKE
DANGER OF ACCIDENT!
• The maximum brake output is only achieved after a few brake processes
with a new brake disc or new brake linings!
• The brake disc will grow very hot when braking and may cause burns. The
disc edges may also be very sharp and cause cutting injury. Therefore, do
not touch them while the disc is hot or turning.
• Use only mineral oil for the hydraulic brake system by Shimano and Tektro;
use only DOT4 or an equivalent brake fluid for any other kind. Otherwise,
there may be damage, malfunctions or even brake failure.
DANGER
DANGER OF ACCIDENT AND DAMAGE!
• Replace the brake linings when their thickness is less than 0.5 mm. The bra-
ke output may otherwise drop to complete loss of the brake force and the
brake system may be damaged.
DANGER
61
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Bike 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Bike 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info