791716

PROmax Ranger Neo Plus Manual

173
Zoom out
Zoom in
Previous page
1/276
Next page
Chapter 9: WEBCONTROL 163 June 2022
► Meter Settings
1 The meter can be connected to a data network via an Ethernet cable or via
WiFi. To access the configuration parameters:
•Ethernet network: From the meter, access the preferences options by
pressing the "Installations" key for 1 second. Go to the "Network" tab
where you can find the configuration parameters to register in the
network.
•WiFi network: Connect the USB WiFi adapter and the WiFi configuration
window will appear or you can also access through the "WiFi configuration"
menu from the "Tools" button (F3).
2 Select DHCP ON, if you connect the meter to a network with a router or
server with DHCP protocol enabled. Then the network will set automatically
the parameters in the meter. If not, follow the next steps to set the meter.
3 On "IP Address" box enter the meter IP. Use an IP in the same range used
by your PC in the local network (if you do not know these data see “find out
local network data” section). For instance, if the IP for your PC is 10.0.1.18,
the meter must have a free IP in the same range, like 10.0.1.50.
4 In the "Mask" box, enter the mask value, which should be the same as the
one used by the local network (usually 255.255.255.0; if you do not know
these data see “find out local network data” section).
5 To connect the meter from an external network, fill in the “Gateway” with
the info obtained from the local network.
6 Press on "Save" and then "Exit" to save changes and exit.
7 Connect the meter to a data network with Internet access. You can use an
Ethernet cable connected to the IPCTRL port or in case of WiFi network,
connect the USB WiFi adapter, select the network and enter the password.
► Find out Local Area Network Data (LAN)
1 To obtain data from the Ethernet network where your meter is connected,
you should use a PC connected to this same network.
9.2 Settings and Remote Access
NOTE: Another option is to keep the default configuration in the meter and set
an IP in your PC in the same range as the meter. The default IP of the
meter is 10.8.8.188* so the PC should use a free IP in the same range,
for example 10.8.8.50.
*. For firmware versions prior to 26.8 the default IP is 10.0.6.198
… 173 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info