Manual Proline PLC 241 (page 33 of 71) (English, Dutch, French, Spanish)

654531

Zoom out

Zoom in

1/71

3. Support the freezer door and remove the central

hinge by removing the two screws.

4. Remove the freezer door from the bottom

hinge. Place the freezer door on a padded

surface to prevent it from being scratched.

5. Remove the bottom screws, bottom hinge and

adjustable foot from the bottom of the appliance.

Transfer the foot to the corresponding position

on the opposite side of the bottom.

6. Remove the bottom hinge pin using a spanner.

Turn over the hinge and replace it to the

corresponding position on the opposite side.

7. Remove and refit the blank plugs on the

corresponding holes in the middle of the

appliance.

8. Carefully set the freezer door back into place.

Ensure the door is aligned horizontally and

vertically so that the seals are closed on all

sides before finally tightening the middle

hinge.

Replace the middle hinge. Do not fully tighten

the screws to make the final adjustments.

Downloaded from www.vandenborre.be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline PLC 241 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline PLC 241 Manual

Product: