Manual Proline PLC 241 (page 32 of 71) (English, Dutch, French, Spanish)

654531

Zoom out

Zoom in

1/71

Freezer compartment defrosting

Frost will accumulate inside the freezer compartment depending upon the length of time during which

the door is left open or the amount of moisture introduced.

It is essential to ensure that no frost or ice is allowed to form at places where it will affect the close fitting

of the door seal.

This might allow air to penetrate the cabinet, thus encouraging continuous running of the compressor.

Thin frost formation is quite soft and can be removed with a brush or plastic scraper. Do not use metal or

sharp scrapers, mechanical devices or other means to accelerate the defrosting process. Remove all

dislodged frost from the cabinet floor.

For the removal of thin frost it is not necessary to switch off the appliance.

For the removal of heavy ice deposits, disconnect the appliance from the mains supply and empty the

contents into cardboard boxes and wrap in thick blankets or layers of paper to keep them cold. Defrosting

will be most effective if carried out when the freezer compartment is empty, and it should be carried out

as quickly as possible.

Any increase in temperature of frozen food packages during defrosting will shorten the storage life.

Provided that the contents are well wrapped and placed in a cool area, they can be kept outside the

appliance for several hours.

Before replacing the food in the freezer compartment, check that it has not thawed out.

After defrosting is finished clean the inside with a solution of warm water with a little bicarbonate of

soda and then dry thoroughly. Wash all removable parts in the same way and reassemble.

Reconnect the appliance to the mains supply and leave for 2 to 3 hours on the temperature setting 7

before introducing the food back into the freezer compartment and setting the temperature to your

normal setting.

DOOR CONVERSION

If you need to hinge your doors on the opposite sides it is recommended that you call your local

authorised service agent to make this conversion or ask a technician.

Before you reverse the doors, you should ensure the appliance is unplugged and empty. It is

recommended to use a crosshead screwdriver and a spanner (both not supplied).

1. Remove the four screws on the top cover and

then remove the top cover.

2. Remove the three screws and then remove

the top hinge that holds the door in place. Lift

the door and place it on a padded surface to

prevent it from being scratched.

Downloaded from www.vandenborre.be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline PLC 241 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline PLC 241 Manual

Product: