Manual Proline PLC 102 (page 16 of 36) (English, German, Dutch, French)

495822

Zoom out

Zoom in

1/36

Downloaded from www.vandenborre.be

Problem Possible cause Solution

The thermostatic control is not

Check setting of thermostatic

control

There is no voltage in the mains

socket (try to connect another

appliance into it)

Call an electrician

Customer Service

If your appliance is still not working properly

after making the above checks, contact the

nearest service centre.

To obtain fast service, it is essential that

when you apply for it you specify the model

and serial number of your appliance which

can be found either on the guarantee certifi-

cate or on the rating plate located on the

external right side of the appliance.

TECHNICAL DATA

Dimensions

Height × Width × Depth (mm): Further technical information are situ-

ated in the rating plate on the external

right side of the appliance.

850 × 550 × 593

Rising Time 26 hours

INSTALLATION

Positioning

Warning! If you are discarding an old

appliance that has a lock or catch on

the lid, you must ensure that it is made

unusable to prevent young children

being trapped inside.

Important! The appliance shall have the

plug accessible after installation.

This appliance can be installed in a dry, well

ventilated indoor (garage or cellar), but for

optimum performance install this appliance

at a location where the ambient tempera-

ture corresponds to the climate class indi-

cated on the rating plate of the appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility

if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Di-

rectives.

Ventilation requirements

1. Put the freezer in horizontal position on

a firm surface. The cabinet must be on

all four feet.

2. Make sure that the clearance between

the appliance and rear wall is 5 cm.

3. Make sure that the clearance between

the appliance and the sides is 5 cm.

The airflow behind the appliance must be

sufficient.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline PLC 102 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline PLC 102 Manual

Product: