654512
5
Zoom out
Zoom in
Previous page
1/32
Next page
4
ASSEMBLY
Make sure that the appliance is switched off and unplugged from the mains socket.
1. Place the appliance base on a dry, level surface
with the control knob facing forward.
2. Place the bowl on the base, fitting the centre
opening of the bowl over the power shaft.
x Make sure the bowl handle aligns the unlock
symbol on the base.
3. Grasp the bowl handle and turn the bowl to the
left until it locks into position.
4. Insert the desired attachment into the bowl.
x If using the chopping blade, place it over the centre
pole of the bowl and allow it to fall freely to the
bottom of the bowl.
x If using the slicing/shredding disc, first place the disc stem over the power
shaft with large opening facing down, then place the slicing/shredding disc
over the disc stem.
a. If shredding, ensure that the raised shredding holes are on top;
b. If slicing, ensure that the raised slicing blade is on top.
5. Place the bowl cover on the bowl, making sure
the arrow on the bowl cover aligns the unlock
symbol on the bowl rim.
6. Grasp the feed tube and turn the cover to the left
until it locks into place.
7. Fit the food pusher into the feed tube.
8. Plug the appliance into the mains socket.
NOTE: Your food processor features a safety interlock system. The appliance will not
operate unless the bowl and bowl cover are properly aligned and locked into place.
OPERATION
WARNING: DO NOT OPERATE THE APPLIANCE WITHOUT BOWL COVER LOCKED.
Turning on and off the food processor
x To turn on the appliance, turn the control knob to the ON position. The appliance
will operate continuously and the indicator light will illuminate.
Downloaded from www.vandenborre.be
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proline FP35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proline FP35 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info