Manual Progress pem 6000 e (page 11 of 28) (English, German, Dutch, French)

336639

Zoom out

Zoom in

1/28

CARE AND CLEANING

Important! The risk of burns from residual

heat!

Let the appliance become sufficiently cool.

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the surface

cause no effect on how the appliance

operates.

To remove the dirt:

1. Use the cleaning powder or the clean-

ing pad.

2. Clean the appliance with a moist cloth

and some detergent.

3. Heat the hotplate to a low temperature

and let it to dry.

4. To keep the hotplates in good shape,

regularly rub in a sewing machine oil.

Polish off the oil with absorbent paper.

Important! For stainless steel edges of the

hob use the cleaning agent for stainless

steel.

The stainless steel edge of the plate

can change the colour as a result of

the high temperature.

The stainless steel can become dirty if the

temperature is too high. Because of this do

not cook with the stone pots, earthenware

pans or cast iron plates. Do not use the alu-

minium foil to prevent damage to the top

during operation.

The Stainless steel parts wash with water,

and then dry with a soft cloth.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the appli-

ance or operate it.

Activate the appliance again

and set the heat setting in less

than 10 seconds.

Problem with the house electri-

cal system.

Examine the fuse in the electri-

cal system of the house in the

fuse box. If the fuses blow

again and again, speak to

qualified electrician.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the customer service. Give the data from

the rating plate, three digit letter code for

the glass ceramic (it is in the corner of the

glass surface) and an error message that

comes on.

Make sure, you operated the appliance cor-

rectly. If not the servicing by a customer

service technician or dealer will not be free

of charge, also during the warranty period.

The instructions about the customer service

and conditions of guarantee are in the guar-

antee booklet.

INSTALLATION

Warning! Refer to "Safety information"

chapter.

Before the installation

Before the installation of the appliance, re-

cord the information below from the rating

plate. The rating plate is on the bottom of

the appliance casing.

• Model ...........................

• PNC .............................

• Serial number ....................

Built-in appliances

• Only use the built-in appliances after you

assemble the appliance into correct built-

in units and work surfaces that align to

the standards.

progress 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress pem 6000 e in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress pem 6000 e Manual

Product: