806697

Progress PAI6205E Manual

16
Zoom out
Zoom in
Previous page
1/60
Next page
Problem Possible cause Remedy
You can hear a constant beep
noise.
The electrical connection is incor‐
rect.
Disconnect the hob from the electri‐
cal supply. Ask a qualified electri‐
cian to check the installation.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the sensor
fields.
The hob deactivates. You put something on the sensor
field .
Remove the object from the sensor
field.
Residual heat indicator does
not come on.
The zone is not hot because it op‐
erated only for a short time or the
sensor is damaged.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
You use a very tall pot which
blocks the signal.
Use a smaller pot, change the cook‐
ing zone or operate the hood man‐
ually.
Automatic Heat Up does not
operate.
The highest heat setting is set. The highest heat setting has the
same power as the function.
The zone is hot. Let the zone become sufficiently
cool.
The heat setting changes be‐
tween two levels.
Power management operates. Refer to "Daily use".
The control panel becomes
hot to the touch.
The cookware is too large or you
put it too close to the control pan‐
el.
Put large cookware on the rear
zones, if possible.
comes on. Child Safety Device or Lock oper‐
ates.
Refer to "Daily use".
comes on. There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable. Use cookware suitable for induction
hobs. Refer to "Hints and tips".
The diameter of the bottom of the
cookware is too small for the
zone.
Use cookware with correct dimen‐
sions. Refer to "Technical data".
and a number come on. There is an error in the hob. Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
16 ENGLISH
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress PAI6205E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress PAI6205E in the language / languages: English, German, French as an attachment in your email.

The manual is 0.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info