Manual Progress pag 6430 (page 14 of 80) (English, German, Dutch, French)

336638

Zoom out

Zoom in

1/80

progress

Remplacement of the voltage cable

The connection of the voltage cable to

the appliance's terminal block is of type "Y".

This means that its replacement requires the

specific equipment of a technician. In this

case, only cable type H05V2V2-F T90 must

be used. The cable section must be suitable

to the voltage and the working temperature.

The yellow/green earth wire must be

approximately 2 cm. longer than the phase

wires (Fig. 4-a).

To open the terminal block and reach the

terminals, proceed as follows:

z insert the point of a screwdriver into the

visible protrunding part of the terminal

block;

z exert a light pressure and lift (Fig. 4-b)

Fig. 4-b

Earth

(yellow/green))

Neutral

Fig. 4-a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress pag 6430 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress pag 6430 Manual

Product: