Manual Progress pag 6430 (page 12 of 80) (English, German, Dutch, French)

336638

Zoom out

Zoom in

1/80

progress

Adaptation to different types of gas

Injectors replacement

• Remove the pan supports.

• Remove the burner's caps and crowns.

• With a socket spanner 7 unscrew and

remove the injectors (Fig. 2), and replace

them with the ones required for the type

of gas in use.

• Reassemble the parts, following the

same procedure backwards.

• Replace the rating label (placed near the

gas supply pipe) with the relevant one for

the new type of gas supply. You can find

this label in the package of the injectors

supplied with the appliance.

Should the feeding gas pressure be different

or variable compared with the required

pressure, an appropriate pressure adjuster

must be fitted on the gas supply pipe, in

compliance with the rules in force.

Adjustment of minimum level

To adjust the minimum level of the burners,

proceed as follows:

• Light the burner.

• Turn the knob on the minimum position.

• Remove the knob.

• With a thin screwdriver, adjust the by-

pass screw (Fig. 3). If changing from

natural gas to LPG, completely tighten

clockwise the screw, until a small regular

flame is obtained.

• If changing from LPG to natural gas

unscrew about 1/4 turn the by-pass

screw, until a small regular flame is

obtained.

• Finally check the flame does not go out

when quickly turning the knob from the

maximum position to the minimum

position.

This procedure can easily be carried out,

anyhow the hob has been positioned or built

in the working top.

Fig. 2

)

Bypass-screw

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress pag 6430 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress pag 6430 Manual

Product: