731234
24
Zoom out
Zoom in
Previous page
1/37
Next page
INSTALLATION
6
You should fit at least one CO detector near to
or inside every bedroom or living room.
You should fit at least one CO detector on every
floor.
For enhanced protection, fit a CO detector at
least 6 metres from heat source that use fuel.
NEVER install a carbon monoxide detector:
Within 6 metres of your central heating boiler or other sources of heat that burn fuel, or appli-
ances such as a kettle.
In garages, kitchens or places where your central heating boiler is located. In extremely dusty or
greasy environments.
In extremely humid areas. This detector should be fitted at least 3 metres from a bath, shower or
washing machine. In spaces with high levels of moisture.
In areas where the temperature can fall below 0°C or rise above 45°C.
In moving air, such as near to ceiling fans, heating pipes, air conditioning, open windows. Air
streams will mean that carbon dioxide only reaches the sensor for a short time.
Outdoors or in direct sunlight.
IMPORTANT: Carbon monoxide is almost as
light as air and spreads easily through rooms
and houses. Position the CO detector at least
1.5 above the ground, no lower!
IMPORTANT: : This detector has been designed for use in a small family home. It has not been
designed for use in shared accommodation areas. In these cases, a detector should be fitted in
each housing unit.
SENSOR FAULT
The detector will automatically check the sensor every 2
minutes. If the detector is not working properly, the yellow
FAULT light will illuminate and the display will show “Err”.
The sensor check will be carried out every 10 seconds and
an alarm will sound.
If the sensor is working correctly, the detector will return to
stand-by mode.
5
IMPORTANT: The detector may give a FAULT signal for certain gases which are not harmful to
humans (e.g. alcohol). Remove the batteries and place the detector in the open air for 24 hours.
If the detector shows the FAULT indicator again, replace it immediately.
Err
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PSE-522 - 566025100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PSE-522 - 566025100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info