Manual ProfiCook WK 1233 (page 35 of 60) (English, German, Dutch, Danish, French, Polish)

814886

Zoom out

Zoom in

1/60

Electrical connection

WARNING:

 The installation to the mains supply must conform

to the local standards and regulations.

 Improper connection may cause to an electric

shock!

 Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

 The accessibility of the power plug must be en-

sured to disconnect the appliance from the power

supply in case of emergency.

 Make sure that the voltage supply matches the

specifications on the rating label before connect-

ing.

 Connect the mains cable to a properly installed

and earthed wall outlet.

 If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Startup / Operation

Prior to first use

CAUTION:

After transport, the appliance should be left standing

upright for approx. four hours before connecting to

the power supply. Nonobservance could lead to mal-

function of the cooling system and causes an appli-

ance breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter

“Cleaning and Maintenance”

Starting the appliance

 Connect the appliance to the power supply.

 Set the desired indoor temperature. Read the

following sections.

Operation overview

1 Display

2 Switch interior lighting on and off

3 Increase temperature stepwise by 1°C (1°F)

4 Decrease temperature stepwise by 1°C

(1°F)

3+4

Switch display between °C and °F

 Press the button (2) to switch the interior lighting

off and on again.

The indoor lighting will turn off automatically after

about 10 minutes, saving energy.

 Use the buttons (3) and (4) to set the interior tem-

perature. The display (1) shows the selection.

A few seconds after the last button press, the

temperature display will automatically change to

the actual temperature value currently in the ap-

pliance.

The next time the button is pressed, the display

will first show the last set temperature value.

 By pressing the button combination (3+4), you

can change the temperature display to Fahrenheit

or Celsius.

Settings

The temperature value is adjustable between:

+11°C to +18°C (+52°F to +65°F)

The reachable value cannot be higher than the am-

bient temperature at the place of installation.

During initial startup, longer standstill of the device or

temperature adjustment, there may be a deviation of

a few degrees between the temperature you have

selected and the temperature shown on the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook WK 1233 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 0.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ProfiCook WK 1233 Manual

Product: